PAGE TOP

【HURRICANE】Narrow Type 1 Φ 7/8 吋 鋼製把手

會員價: NT$ 1,199

點數: 12
定價: NT$ 1,394
SALE 庫存OK

    • 商品編號:
    • HB0045C-01


09時20分現在:Webike在庫1個,約 4個工作天到貨!

適用車型:

CB400SS * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
CB400SF VTEC Revo (NC42) 08-12 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
CB1300SB 05-09 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
ZEPHYR750 RS * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
ZRX1100 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
W400 * Required switch hole drilling
GRASS TRACKER -08 (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap. / * Throttle cable ? Clutch cable ? Change of handling of brake hose is required. / * It is necessary to change the direction of the brake banjo.
GSR400 -12 * Required switch hole drilling / * Normal can be used for side cap.
RV200 VANVAN -07 (NH41A) (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap.
查看更多

商品詳細敘述

以下翻譯由google提供,若您想查看原文請點選顯示原文

【要點】

車把顏色 : 鍍鉻

[把手規格]
車把 : 鋼,黑色 / 外徑Φ22 。 2mm / 內徑Φ18mm
可以使用STD電纜和軟管 。

[把手尺寸]
總高度 : 60mm
總寬度 : 605mm
支架安裝部件有效寬度 : 125mm
回退大小 : 195mm
內角 : 45度
反轉角度 : 60度

【商品描述】


日本制造 。 原型,安裝測試和生產都由我們公司從頭到尾處理 。 使用在東大阪多年精制的技術和專業知識,只有最好的材料和專業知識進入這些把手 - 從材料的選擇到多種拋光,他們的部件號的題字,和高度精確彎曲和焊接 。 使用STKM13A鋼具有卓越的抗拉強度 。 清除了JMCA安全標准 。 成品厚,耐用,耐腐蝕的三重鎳 / 鍍鉻 (3層鎳,1層鉻) 。

【注意】


*手柄夾 (持有人或職位) 顯示在圖像中不包括在產品中 。
*所示尺寸是水平放置時的尺寸 。

適用車型

    • CB400SS * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • CB400SF VTEC Revo (NC42) 08-12 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • CB1300SB 05-09 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • APE50 08-12 (FI drum brake car) * Required switch hole drilling
    • CB1300SF 03-09 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm) / * Please increase the bar end and install it in a feeling.
    • ZEPHYR750 RS * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • ZRX1100 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • W400 * Required switch hole drilling
    • ZRX400 II * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • W800 * Required switch hole drilling / * Change of clutch cable handling is required.
    • GRASS TRACKER -08 (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap. / * Throttle cable ? Clutch cable ? Change of handling of brake hose is required. / * It is necessary to change the direction of the brake banjo.
    • GSR400 -12 * Required switch hole drilling / * Normal can be used for side cap.
    • RV200 VANVAN -07 (NH41A) (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap.
    • GRASS TRACKER BIGBOY 09-12 (FI car) * Required switch hole drilling / * Normal can be used for side cap.
    • GRASS TRACKER BIGBOY -08 (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap. / * Throttle cable ? Clutch cable ? Change of handling of brake hose is required. / * It is necessary to change the direction of the brake banjo.

商品評論

  • 0.0

    0 商品評論

  • 此商品沒有商品評論。
  • 撰寫評論

推薦商品