PAGE TOP

【HURRICANE】Forward Conti Type 1 Φ 7/8 吋 鋼製把手

會員價: NT$ 1,547

點數: 15
定價: NT$ 1,789
SALE

    • 商品編號:
    • HB0065B-01


下訂後於1~2個工作天以MAIL回覆確定交期。

適用車型:

TW200 E 00- (Disc brake car) * Required switch hole drilling
SR500 88-00 (CV cab car) * Required switch hole drilling
SR400 88-00 (CV cab car) * Required switch hole drilling
ST250 E -07 (NJ4AA) (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap. / * It is necessary to change the direction of the brake banjo.
GSR400 -12 * Required switch hole drilling / * Normal can be used for side cap.
GRASS TRACKER BIGBOY 09-12 (FI car) * Required switch hole drilling / * Normal can be used for side cap.
ZEPHYR 400 x * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
ZRX400 -04 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm) / * With cowl Model 05 or later interfere with the cowl and can not be installed.
ZEPHYR400 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
查看更多

商品詳細敘述

以下翻譯由google提供,若您想查看原文請點選顯示原文

【要點】

車把顏色 : 黑色

[把手規格]
車把 : 鋼,黑色 / 外徑Φ22 。 2mm / 內徑Φ18mm
可以使用STD電纜和軟管 。

[把手尺寸]
總高度 : 50mm
總寬度 : 680mm
支架安裝部件有效寬度 : 120mm
回退大小 : 145mm
內角 : 47度
反轉角度 : 140度

【商品描述】


日本 。 原型,安裝確認,批量生產,由公司一貫管理 。 把手包括很多關注,如精選的材料東東大阪的技術多年,精心選擇材料通過知道,幾種類型的拋光,零件號沖壓,高精度彎曲和焊接,高品質表面處理 。 使用STKM 13 ASteel材料具有優異的拉伸強度 。 JMCA安全標准值清除 。 從黑色鍍鉻的頂部應用丙烯酸漆的雙重腐蝕處理 。

【注意】


*手柄夾 (持有人或職位) 顯示在圖像中不包括在產品中 。
*所示尺寸是水平放置時的尺寸 。

適用車型

    • TW200 E 00- (Disc brake car) * Required switch hole drilling
    • SR500 88-00 (CV cab car) * Required switch hole drilling
    • SR400 88-00 (CV cab car) * Required switch hole drilling
    • XJR400 R 01-07 (RH02J) * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • SR400 01-12 A cab / FI disc brake car) * Required switch hole drilling
    • ST250 E -07 (NJ4AA) (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap. / * It is necessary to change the direction of the brake banjo.
    • GSR400 -12 * Required switch hole drilling / * Normal can be used for side cap.
    • GRASS TRACKER BIGBOY 09-12 (FI car) * Required switch hole drilling / * Normal can be used for side cap.
    • GRASS TRACKER 09-12 (FI car) * Required switch hole drilling / * Normal can be used for side cap.
    • ST250 -07 (NJ4AA) (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap. / * It is necessary to change the direction of the brake banjo.
    • ZEPHYR 400 x * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • ZRX400 -04 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm) / * With cowl Model 05 or later interfere with the cowl and can not be installed.
    • ZEPHYR400 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • ESTRELLA RS Custom 96-99 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • ZRX400 II * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm) / * With cowl Model 05 or later interfere with the cowl and can not be installed.

商品評論

  • 0.0

    0 商品評論

  • 此商品沒有商品評論。
  • 撰寫評論

推薦商品