PAGE TOP

【HURRICANE】European 2型 Φ7/8英吋 金屬把手

會員價: NT$ 1,547

點數: 15
定價: NT$ 1,789
SALE 庫存OK

    • 商品編號:
    • HB0071B-01


12時54分現在:Webike在庫1個,約 4個工作天到貨!

適用車型:

GRASS TRACKER 09-12 (FI car) * Required switch hole drilling / * Normal can be used for side cap.
GRASS TRACKER BIGBOY 09-12 (FI car) * Required switch hole drilling / * Normal can be used for side cap.
GRASS TRACKER -08 (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap. / * Throttle cable ? Clutch cable ? Change of handling of brake hose is required. / * It is necessary to change the direction of the brake banjo.
CB1100 Type I -12 (Excluding uphill model ABS car) * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
FTR223 (With side basket) * Required switch hole drilling
MONKEY 84-07 (Z50J-1600008-, AB27-1000001-1899999) * Top bridge with H30 holder, or MONKEY handle holder
BALIUS II * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
ZEPHYR1100 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm) / * It is necessary to change the direction of the brake banjo.
ZEPHYR1100 RS * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm) / * It is necessary to change the direction of the brake banjo.
查看更多

商品詳細敘述

以下翻譯由google提供,若您想查看原文請點選顯示原文

【要點】

車把顏色 : 黑色

[把手規格]
車把 : 鋼,黑色 / 外徑Φ22 。 2mm / 內徑Φ18mm
可以使用STD電纜和軟管 。

[把手尺寸]
總高度 : 120mm
總寬度 : 705mm
支架安裝部件有效寬度 : 125mm
回退大小 : 160mm
內角 : 32度
反轉角度 : 83度

【商品描述】


日本 。 原型,安裝確認,批量生產,由公司一貫管理 。 把手包括很多關注,如精選的材料東東大阪的技術多年,精心選擇材料通過知道,幾種類型的拋光,零件號沖壓,高精度彎曲和焊接,高品質表面處理 。 使用STKM 13 ASteel材料具有優異的拉伸強度 。 JMCA安全標准值清除 。 從黑色鍍鉻的頂部應用丙烯酸漆的雙重腐蝕處理 。

【注意】


*手柄夾 (持有人或職位) 顯示在圖像中不包括在產品中 。
*所示尺寸是水平放置時的尺寸 。

適用車型

    • GRASS TRACKER 09-12 (FI car) * Required switch hole drilling / * Normal can be used for side cap.
    • GRASS TRACKER BIGBOY 09-12 (FI car) * Required switch hole drilling / * Normal can be used for side cap.
    • GRASS TRACKER -08 (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap. / * Throttle cable ? Clutch cable ? Change of handling of brake hose is required. / * It is necessary to change the direction of the brake banjo.
    • GRASS TRACKER BIGBOY -08 (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap. / * Throttle cable ? Clutch cable ? Change of handling of brake hose is required. / * It is necessary to change the direction of the brake banjo.
    • RV200 VANVAN -07 (NH41A) (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap.
    • CB1100 Type I -12 (Excluding uphill model ABS car) * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • FTR223 (With side basket) * Required switch hole drilling
    • MONKEY 84-07 (Z50J-1600008-, AB27-1000001-1899999) * Top bridge with H30 holder, or MONKEY handle holder
    • CB750 (RC42) 04- * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • CB1300SB 10-12 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm) / * Change of handling of brake hose is required.
    • BALIUS II * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • ZEPHYR1100 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm) / * It is necessary to change the direction of the brake banjo.
    • ZEPHYR1100 RS * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm) / * It is necessary to change the direction of the brake banjo.
    • ZRX1100 * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • ZRX1200 R * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)

商品評論

  • 0.0

    0 商品評論

  • 此商品沒有商品評論。
  • 撰寫評論

推薦商品