KTM 690 Enduro的鋼琴架由18毫米不銹鋼管制成，“打擊軌道”，通過保證特別高的穩定性，即使關閉> 。
這種堅固設計的原因是KTM沒有在690 Enduro上安裝合適的後架 。 事實上，你可以說後槽是後車架 。
車籃通過兩個支柱固定在車手腳蹬托架的左右兩側 。 在機架的每一側有兩個附加支柱，以防止機架機架扭轉 。 一個支柱不足以給機架提供必要的穩定性 。 右側和左側的兩個機架元件通過號牌安裝座後面的一個桿擰在一起 。 選擇機架的位置以確保即使在行李箱就位時，在彎曲處仍然有足夠的空間 。 車籃的安裝寬度為48厘米 。 後腳踏板可以直接安裝到行李架上 。01-051-0170-0
The pannier rack for the KTM 690 Enduro is made of 18mm stainless steel tube、 which guarantees a particularly high level of stability even off the beaten track.
The reason for this sturdy design is that KTM has not fitted a proper rear frame to the 690 Enduro. In fact、 you could say the rear tank is the rear frame.
The pannier rack is fastened via two struts to the right and left of the riders footpeg holder. There are two additional struts on each side of the rack to prevent the pannier rack from twisting. One strut would not be enough to give the rack the necessary stability. The two rack elements on the right and left are screwed together by a bar behind the number plate mounting. The position of the rack was chosen to make sure that even with panniers in place、 there would still be enough room in tight bends.The fitted width of the pannier rack is 48cm. The pillion footpegs can be fitted directly to the pannier rack.01-051-0170-0