適用車型
[要點]
顏色：銀色
[商品描述]
岩石和碎石都不是雅馬哈Super Tenere xt1200z的Altrider防滑板的對手。防滑板采用手工氬弧焊，並在其上加裝了防滑墊。
Altrider防滑板是雅馬哈Super Tenere xt1200z的解決方案。
有銀色和黑色兩種顏色可供選擇。
雅馬哈超級跑車的Altrider防滑板將無法使用。
2014+super tenere的防滑板兼容ES和非ES版本。
更換機油濾清器時必須拆下防滑板。使用售後市場的機油濾清器，必須與原廠機油濾清器的長度相同，長度為2.5'，以避免干擾。
單獨使用機油，可以在安裝防滑板後更換。
.3.175mm粉末噴塗鋁材
.手工虎口焊
.3.175mm粉末噴塗鋼手工虎口焊支架取代薄型沖壓板。後支架是由4.7625毫米的粉末塗層鋼制成，並利用2個安裝點，安裝在後支架上。每一面都能抵御沖擊後的旋轉。
Altrider防滑板是雅馬哈Super Tenere xt1200z的解決方案。
有銀色和黑色兩種顏色可供選擇。
雅馬哈超級跑車的Altrider防滑板將無法使用。
2014+super tenere的防滑板兼容ES和非ES版本。
更換機油濾清器時必須拆下防滑板。使用售後市場的機油濾清器，必須與原廠機油濾清器的長度相同，長度為2.5'，以避免干擾。
單獨使用機油，可以在安裝防滑板後更換。
.3.175mm粉末噴塗鋁材
.手工虎口焊
.3.175mm粉末噴塗鋼手工虎口焊支架取代薄型沖壓板。後支架是由4.7625毫米的粉末塗層鋼制成，並利用2個安裝點，安裝在後支架上。每一面都能抵御沖擊後的旋轉。
[注意]
[商品描述]
Rocks and debris are no match for the AltRider Skid Plate for the Yamaha Super Tenere XT1200Z. Constructed of 3.175 mm powder coated aluminum， it reaches high on the left hand side to protect the stator， and provides extensive coverage of the headers on the right. The skid plate features hand TIG welds and stainless hardware， and will be manufactured in the United States.
The AltRider skid plate is the solution for the Yamaha Super Tenere XT1200Z， no matter what adventure you take.
Available in silver and black.
The AltRider skid plate for Yamaha Super Tenere will not work with OEM Yamaha crash bars because of interference with crossbar on crash bars. Skid plate will mount up but cross bar will have to be removed.
The skid plate for the 2014+ Super Tenere is compatible with both the ES and non-ES version.
・Skid plate must be removed to change oil filter. If using aftermarket oil filter， it must be the same 2.5” length as OEM to avoid interference.
・Oil， alone， can be changed with skid plate installed.
・3.175 mm powder coated aluminum
・Hand TIG welds
・3.175 MM powdered coated steel hand TIG welded brackets replace the thin stamped sheet bracket to resisting bending upon impact
・The rear bracket is constructed from 4.7625 MM powdered coated steel and utilized 2 mounting points on each side to resist pivoting upon impact.
The AltRider skid plate is the solution for the Yamaha Super Tenere XT1200Z， no matter what adventure you take.
Available in silver and black.
The AltRider skid plate for Yamaha Super Tenere will not work with OEM Yamaha crash bars because of interference with crossbar on crash bars. Skid plate will mount up but cross bar will have to be removed.
The skid plate for the 2014+ Super Tenere is compatible with both the ES and non-ES version.
・Skid plate must be removed to change oil filter. If using aftermarket oil filter， it must be the same 2.5” length as OEM to avoid interference.
・Oil， alone， can be changed with skid plate installed.
・3.175 mm powder coated aluminum
・Hand TIG welds
・3.175 MM powdered coated steel hand TIG welded brackets replace the thin stamped sheet bracket to resisting bending upon impact
・The rear bracket is constructed from 4.7625 MM powdered coated steel and utilized 2 mounting points on each side to resist pivoting upon impact.
[注意]
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
問與答（0）
商品評論（0 ）
0/5