• 【TOURATECH】Touratech後避震 - 「Webike-摩托百貨」

會員價: NT$ 33,211

點數: 664
定價: NT$ 36,901

    • 商品編號:
    • 01-058-0010-0


<< 您可在此選擇居住地區,以確認收到商品包裹之日期



XRV750 Africa Twin RD07 93-



後懸吊・後避震器 銷售排行





This shock absorber is the right choice for normal touring on the HONDA XRV750 AFRICA TWIN.This type of shock absorber offers a large adjustment range with plenty of reserves to meet the demands of motorbike travel.Its floating piston design and fine damping adjustment enable a more suitable suspension setup and better balance than is possible with the bike manufacturer’s standard components.To compensate for large luggage loads,the spring preload can be adjusted using an adjustment tool.The damping setting on this Level1 shock allows the necessary degree of control over the bump and rebound to adjust the shock absorber to suit your individual ride comfort requirements.

Facts at a glance:
=> This shock absorber is configured and adjusted ready for use based on our experience with the HONDA XRV750 AFRICA TWIN.
=> The parameters are:vehicle weight / shock absorber pivot point / design constraints / test rides.
=> This shock absorber is designed for a rider’s weight including luggage of up to 100 kg.
=> As with all suspension solutions,the rear and front of the motorbike should be modified together.
=> The matching component for the front of the HONDA XRV750 AFRICA TWIN RD07 is the:
=> Hyperpro progressive replacement fork springs,Honda XRV750 Africa Twin RD07 >1993 01-040-7415-0
=> If only one component is changed,optimal handling will not be achieved.

The equipment fitted here,with its adjustment capabilities,is sufficient if the suspension only occasionally needs to be adjusted for different loading conditions.

Characteristics of the Touratech Suspension Level1 shock absorber:
=> The shock absorber body is made of aluminium.
This keeps its weight to a minimum.
=> Special low-friction seals are fitted.
As a result,there is very little wear and the shock absorber has a long service life.
=> Strong stainless steel bushings for the securing bolts are fitted to the spring eye.
They make sure the securing bolt is seated firmly with no play even under maximum loads.
=> All assemblies and components are designed for intense use on heavy touring motorcycles.
=> The damper settings were developed in line with Touratech’s experience and requirements.
They are based on many miles travelled and experiences gained from use by the Touratech Race Team.
=> Floating piston design.The floating piston separates the damping fluids - oil and nitrogen - allowing them to work separately.
Finer shock absorber response.
Precise,high-performance damping even with very high damping frequency (bad roads,dirt tracks).
Shock absorber cools better.
Minimal restrictions for the shock absorber’s fitting position on the motorbike.
=> QR barcode on the shock absorber contains individual shock absorber data.
Simply scan with a smartphone to access the specific information for the shock absorber.
Information on the shock absorber’s factory settings is always available.Can be reset if incorrectly adjusted.

The basic setup fitted here is designed for riders up to 100 kg including luggage.Modifications are possible
for a heavier rider (more than 100 kg) and/or if the bike is usually ridden with a passenger / with luggage.In this case,
we individually modify the shock absorber to meet your needs by fitting a spring with a higher spring rate.


    • XRV750 Africa Twin RD07 93-




腳踏後移套件 BABYFACE R nineT
後搖臂軸芯偏移底座組 YOSHIMURA GSX-R1000
鏈條調整器套件 YOSHIMURA GSX-R600
後輪軸鏈條調整器套件 YOSHIMURA RMZ250
腳踏套件 YOSHIMURA Ninja 250 ABS
透明無內胎套件 OUTEX CB1100EX
【Brock’s】GSX 1300R HAYABUSA 隼 強化型輪轂減震器
GSX 1300R HAYABUSA 隼 強化型輪轂減震器 Brock’s GSX1300R HAYABUSA
鋁合金後避震器 田中商會 CHALY70
後懸吊連桿 力造
前叉穩定器 力造 SY250
【DRIVEN】D-Axis 腳踏後移套件
D-Axis 腳踏後移套件 DRIVEN MT-07
【DRIVEN】D-Axis TT 腳踏後移套件
D-Axis TT 腳踏後移套件 DRIVEN YZF-R1