• 【TOURATECH】Touratech 後避震器 - 「Webike-摩托百貨」


Touratech 後避震器

  • 商品編號:
  • 01-044-5876-0

會員價: NT$ 35,543

點數: 355


<< 您可在此選擇居住地區,以確認收到商品包裹之日期


    • 分期期數


R1200GS 04-12 Air cooling high line



前叉 銷售排行






This shock absorber has been specially configured for the Telelever front wheel suspension and for reducing the seat height on the BMW R1200GS (-50 mm).The strengths of the Telelever system are reinforced by the fine response characteristics of the Touratech shock absorber.The large adjustment range allows the front end of the motorbike to be adapted to suit the requirements of motorbike touring.With this high-performance shock,you can perfectly adjust your bike’s balance.The appropriate shock absorber needs to be fitted to compensate on the rear end of the BMW R1200GS (see facts at a glance).The damping setting on this Level 1 shock allows the necessary degree of control over the bump and rebound to adjust the shock absorber to suit your individual ride comfort requirements.

Facts at a glance:
=> This shock absorber is configured and adjusted ready for use based on our experience with the front of the BMW R1200GS.
=> The parameters are:vehicle weight / shock absorber pivot point / design constraints / test rides.
=> This shock absorber is designed for nearly all possible loading conditions on the front of the bike.
=> A higher spring rate only makes sense if there is significantly greater weight on the front (modifications/conversions).
=> As with all suspension solutions,the rear and front of the motorbike should be modified together.
=> In this case,the possible components for the rear of the BMW R1200GS are:
=> Touratech Suspension rear shock absorber for BMW R1200GS >2009 type Level1 01-044-5860-0
=> Touratech Suspension rear shock absorber for BMW R1200GS >2009 type High End 01-044-5865-0
=> Touratech Suspension rear shock absorber for BMW R1200GS >2009 type Extreme 01-044-5870-0
=> If only one component is changed,optimal handling will not be achieved.

The Level1 shock absorber configured here with its adjustment capabilities is very well suited to this type of motorcycle.Essentially the front suspension only needs to be adjusted once for the suspension setup as a whole.
The interplay of the shock absorber and the BMW Telelever means that no further adjustments for a full/empty tank or tank bag are necessary while riding.

Characteristics of the Touratech Suspension Level1 shock absorber:
=> The shock absorber body is made of aluminium.
This keeps its weight to a minimum.
=> Special low-friction seals are fitted.
As a result,there is very little wear and the shock absorber has a long service life.
=> Strong stainless steel bushings for the securing bolts are fitted to the spring eye.
They make sure the securing bolt is seated firmly with no play even under maximum loads.
=> All assemblies and components are designed for intense use on heavy touring motorcycles.
=> The damper settings were developed in line with Touratech’s experience and requirements.
They are based on many miles travelled and experiences gained from use by the Touratech Race Team.
+ Floating piston design.The floating piston separates the damping fluids - oil and nitrogen - allowing them to work separately.
Gives a finer shock absorber response.
Precise,high-performance damping even with very high damping frequency (bad roads,dirt tracks).
Shock absorber cools better.
Minimal restrictions for the shock absorber’s fitting position on the motorbike.
=> This shock absorber can even be fitted in the small installation space on the front end of the BMW R1200GS.
=> QR barcode on the shock absorber contains individual shock absorber data.
Simply scan with a smartphone to access the specific information for the shock absorber.
Information on the shock absorber’s factory settings is always available.Can be reset if incorrectly adjusted.

The basic setup fitted here is designed for riders up to 100 kg including luggage.Modifications are possible
for a heavier rider (more than 100 kg) and/or if the bike is usually ridden with a passenger / with luggage.In this case,
we individually modify the shock absorber to meet your needs by fitting a spring with a higher spring rate.


    • R1200GS 04-12 Air cooling high line




後懸吊彈簧 HYPERPRO R1200GS
降低型後懸吊彈簧 HYPERPRO R1200GS
【RIZOMA】前&後腳踏轉接座 (左右組)
前&後腳踏轉接座 (左右組) RIZOMA S1000XR
換檔踏板 HammerHead R1200GS
【HammerHead】換檔踏板 橡皮頭
換檔踏板 橡皮頭 HammerHead R1200GS
【HammerHead】後煞車踏板 大型 鋁合金尖端
後煞車踏板 大型 鋁合金尖端 HammerHead R1200GS
【HammerHead】後煞車踏板 旋轉尖端
後煞車踏板 旋轉尖端 HammerHead R1200GS
【HammerHead】後煞車踏板 鈦合金尖端
後煞車踏板 鈦合金尖端 HammerHead R1200GS
【RIZOMA】腳踏轉接座 左右組
腳踏轉接座 左右組 RIZOMA R nineT scrambler
後輪轂外蓋 RIZOMA R1200GS
後搖臂軸芯外蓋 RIZOMA R1200GS
單後避震器 Matris R1200GS
後避震器 OHLINS R1200GS
【r’s gear】Low Down 降低扭力桿
Low Down 降低扭力桿 r’s gear R1200 RS
降低型彈簧組合套件 HYPERPRO R1200GS