【TOURATECH】Touratech 後避震器

  • 【TOURATECH】Touratech 後避震器 - 「Webike-摩托百貨」

會員價: NT$ 33,211

點數: 664
定價: NT$ 35,314

    • 商品編號:
    • 01-040-5877-0


<< 您可在此選擇居住地區,以確認收到商品包裹之日期



R1150GS (00-03)







This shock absorber has been specially configured for the Telelever front wheel suspension on the BMW R1150GS.The strengths of the Telelever system are reinforced by the fine response characteristics of the Touratech shock absorber.The large adjustment range has enabled us to modify the front of the bike to meet even the extreme requirements of long-distance touring with lengthy off-road stretches and heavy loading.The floating piston design and fine damping adjustment enable a more suitable suspension setup and better balance than is possible with the bike manufacturer’s standard components.To adjust your bike’s balance - depending on the type of rear shock absorber that is fitted - the preload can be adjusted using the adjustment tool.The damping setting on this Level1 shock allows the necessary degree of control over the bump and rebound to adjust the shock absorber to suit your individual ride comfort requirements.

Facts at a glance:
=> This shock absorber is configured and adjusted ready for use based on our experience with the front of the BMW R1150GS.
=> The parameters are:vehicle weight / shock absorber pivot point / design constraints / test rides.
=> This shock absorber is designed for nearly all possible loading conditions on the front of the bike.
=> A higher spring rate only makes sense if there is significantly greater weight on the front (modifications/conversions).
=> As with all suspension solutions,the rear and front of the motorbike should be modified together.
=> In this case,the possible components for the rear of the BMW R1150GS are:
=> Touratech Suspension rear shock absorber for BMW R1150GS type Level1 01-040-5862-0
=> If only one component is changed,optimal handling will not be achieved.

The Level1 shock absorber configured here with its adjustment capabilities is very well suited to this type of motorcycle.Essentially the front suspension only needs to be adjusted once for the suspension setup as a whole.
The interplay of the shock absorber and the BMW Telelever means that no further adjustments for a full/empty tank or tank bag are necessary while riding.

Characteristics of the Touratech Suspension Level1 shock absorber:
=> The shock absorber body is made of aluminium.
This keeps its weight to a minimum.
=> Special low-friction seals are fitted.
As a result,there is very little wear and the shock absorber has a long service life.
=> Strong stainless steel bushings for the securing bolts are fitted to the spring eye.
They make sure the securing bolt is seated firmly with no play even under maximum loads.
=> All assemblies and components are designed for intense use on heavy touring motorcycles.
=> The damper settings were developed in line with Touratech’s experience and requirements.
They are based on many miles travelled and experiences gained from use by the Touratech Race Team.
+ Floating piston design.The floating piston separates the damping fluids - oil and nitrogen - allowing them to work separately.
Gives a finer shock absorber response.
Precise,high-performance damping even with very high damping frequency (bad roads,dirt tracks).
Shock absorber cools better.
Minimal restrictions for the shock absorber’s fitting position on the motorbike.
=> This shock absorber can even be fitted in the small installation space on the front end of the BMW R1150GS.
=> QR barcode on the shock absorber contains individual shock absorber data.
Simply scan with a smartphone to access the specific information for the shock absorber.
Information on the shock absorber’s factory settings is always available.Can be reset if incorrectly adjusted.

The basic setup fitted here is designed for riders up to 100 kg including luggage.Modifications are possible
for a heavier rider (more than 100 kg) and/or if the bike is usually ridden with a passenger / with luggage.In this case,
we individually modify the shock absorber to meet your needs by fitting a spring with a higher spring rate.


    • R1150GS (00-03)




【GILLES TOOLING】Option 腳踏橡皮套件
Option 腳踏橡皮套件 GILLES TOOLING R1200GS
RCT12GT Type 可變改裝腳踏套件 GILLES TOOLING R1100GS
前叉上蓋 Wunderlich R1200GS Adventure
降低型套件 MiZU R1150R
【Wunderlich】煞車踏桿接頭 Touring
煞車踏桿接頭 Touring Wunderlich K1300GT
煞車踏桿接頭 Wunderlich K1300GT
【Wunderlich】Pivot Pegz Larry 腳踏
Pivot Pegz Larry 腳踏 Wunderlich R1100GS
煞車踏板 Wunderlich F650GS [Single]
公路型腳踏板 Wunderlich R1200ST
公路型腳踏 Wunderlich R1200R
【Wunderlich】Vario 舒適型腳踏板系統
Vario 舒適型腳踏板系統 Wunderlich K1200R
前&後腳踏轉接座 RIZOMA F800GS Adventure [Adventure]
後避震器 IKON R1150GS
前叉彈黃(不含前叉油) HYPERPRO R1150GS
後避震彈簧 HYPERPRO R1150GS
降低型彈簧組合套件 HYPERPRO R1150GS