[要點]
缸徑:3.498"
壓縮比:8.75:1
美國製造:是
材質:鋁合金
包裝:一對
尺寸:標準型
特定應用:是
行程:4 1/4"
樣式:鍛造
型式:活塞套件
[商品描述]
'.替換活塞可用於74'、80'和3.625'大缸徑應用
.所有活塞套件都包含兩個活塞、環、腕銷和。腕銷保持器
.所列出的壓縮比是近似值,並使用s&s規定的正確長度的氣缸來計算
.我們的產品是由我們的客戶提供的。要求使用連桿長度為7.440'的連桿(標准長度oem#24281-74a連桿);使用較早的連桿,連桿長度為7.440'。長度為7.470'(原廠#24281-41a)將導致壓縮比略微增加約1/2點,也可能導致間隙問題(
當使用早期樣式的活塞桿時,請仔細檢查所有活塞與氣缸蓋的間隙。
[注意]
*說明書是英文的。
※ 由於進口材料的原因,交貨期可能會延遲。先謝謝你的理解。
[要點]
BORE:3.498"
COMPRESSION RATIO:8.75:1
MADE IN THE U.S.A.:Yes
MATERIAL:Aluminum
PACKAGING:Pair
SIZE:Standard
SPECIFIC APPLICATION:Yes
STROKE:4 1/4"
STYLE:Forged
TYPE:Piston Kit
[商品描述]
・Replacement pistons available for stock 74”, 80”and 3.625”big-bore applications
・All piston kits come with two pistons, rings, wrist pins, and wrist pin keepers
・Compression ratios listed are approximate and are calculated using the correct length cylinders as specified by S&S
・Require the use of connecting rods with a rod length of 7.440”(standard length OEM #24281-74A connecting rods);use of earlier connecting rods with a rod length of 7.470”(OEM #24281-41A) will result in a slight increase in the compression ratio of about 1/2 point, and may also result in clearance problems (check all piston to cylinder head clearances carefully when using the early style rods)
[注意]
※ 取り扱い説明書は英語となります。
※ 輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。