PAGE TOP

【S&S CYCLE】鏈條型凸輪軸/ 583 1999-06用 【CAM 583CHN 99-06 [0925-0528]】

  • 【S&S CYCLE】鏈條型凸輪軸/ 583 1999-06用 【CAM 583CHN 99-06 [0925-0528]】 - 「Webike-摩托百貨」

會員價: NT$ 13,635

點數: 136
定價: NT$ 15,149

    • 商品編號:
    • 330-0004

查詢中...

<< 您可在此選擇居住地區,以確認收到商品包裹之日期

信用卡分期(支持13大發卡銀行,請參閱"信用卡分期說明")。

適用車型:

Street Glide-Injected - FLHX-I 2006
Street Glide - FLHX 2006
Softail Standard Injected - FXST I 2001 - 2006
查看更多

凸輪軸 銷售排行

商品詳細敘述

以下翻譯由google提供,若您想取消請點選顯示原文

[要點]

DRIVE:Chain
EXHAUST CLOSE:22
EXHAUST DURATION:262°
EXHAUST LIFT:.583"
EXHAUST OPEN:60
INTAKE CLOSE:15
INTAKE DURATION:204°
INTAKE LIFT:.583"
INTAKE OPEN:8
MADE IN THE U.S.A.:Yes
MODEL:583 Series
PACKAGING:Pair
SPECIFIC APPLICATION:Yes
STYLE:Performance Replacement
TYPE:Cam Kit

[商品描述]

・Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
・Reverses the rear cam’s direction of rotation, providing additional operating clearance between cam lobes;as a result, higher cam lifts are possible with the gear drive kit
・Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
・Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
・A hydraulic press and other professional-level tools are required to install these kits
・S&S recommends that adjustable pushrod/cover kit PART #0928-0017 be used
・Cam bearings and gaskets must be replaced when installing new cams
・Cams are also available with inner gears only;intended for cam replacement for motors that have already been converted to an S&S gear-drive system
・Made in the U.S.A.
・Cams for 00-06 Twin Cam are for use with stock splined drive gears;for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket;S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used
・Cams for 06 Dyna and 07-16 Twin Cam are for use with models with hydraulic tensioner chain-drive system;cams 510C and 551C are bolt-in applications, all others require high-lift valve springs
・Made in the U.S.A.
・HP103 SERIES GRIND CAMSBolt-in cam for 103” and 106” Big Bore Twin Cam motorsGreat for lighter bikes with strong power from 3500-6000 rpmUse with stock heads (up to 10.2 compression) and low restriction intake and exhaustMR103 CAMSBroad torque curve improves output over stock over the entire rpm rangeBolt-in cam for 103” Twin Cam motorsUse with stock heads and low restriction intake and exhaust475 SERIES GRIND CAMS (OES)Original equipment specificationsBolt-in cam with stock cam timingDoes not require tuning509 SERIES GRIND CAMSStrongest from 1,000-4,500 rpm180 psi cranking compression;no need for compression releasesBolt-in cams for 88 CID engines with stock compression rationGreat low and mid-range torqueLower lift allows them to be bolted into stock 96”-106”06 engines with stock valve springs510 SERIES GRIND CAMS510G/510C cams are designed as bolt-in cam for 88”, 95”, 96”and 103”engines with compression ratios below 9.7:1Stock pushrods and valve springs acceptableStrongest from 3,000-5,000 rpm551 SERIES GRIND CAMSDesigned as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9More power across the rpm range, with improved low and midrange torqueStrongest from 1,000-4,000 rpmCan be used with stock pushrods, springs and lifters99-04 models require high lift springs
・HP103 SERIES GRIND CAMSBolt-in cam for 103” and 106” Big Bore Twin Cam motorsGreat for lighter bikes with strong power from 3500-6000 rpmUse with stock heads (up to 10.2 compression) and low restriction intake and exhaustMR103 CAMSBroad torque curve improves output over stock over the entire rpm rangeBolt-in cam for 103” Twin Cam motorsUse with stock heads and low restriction intake and exhaust475 SERIES GRIND CAMS (OES)Original equipment specificationsBolt-in cam with stock cam timingDoes not require tuning509 SERIES GRIND CAMSStrongest from 1,000-4,500 rpm180 psi cranking compression;no need for compression releasesBolt-in cams for 88 CID engines with stock compression rationGreat low and mid-range torqueLower lift allows them to be bolted into stock 96”-106”06 engines with stock valve springs510 SERIES GRIND CAMS510G/510C cams are designed as bolt-in cam for 88”, 95”, 96”and 103”engines with compression ratios below 9.7:1Stock pushrods and valve springs acceptableStrongest from 3,000-5,000 rpm551 SERIES GRIND CAMSDesigned as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9More power across the rpm range, with improved low and midrange torqueStrongest from 1,000-4,000 rpmCan be used with stock pushrods, springs and lifters99-04 models require high lift springs
・HP103 SERIES GRIND CAMSBolt-in cam for 103” and 106” Big Bore Twin Cam motorsGreat for lighter bikes with strong power from 3500-6000 rpmUse with stock heads (up to 10.2 compression) and low restriction intake and exhaustMR103 CAMSBroad torque curve improves output over stock over the entire rpm rangeBolt-in cam for 103” Twin Cam motorsUse with stock heads and low restriction intake and exhaust475 SERIES GRIND CAMS (OES)Original equipment specificationsBolt-in cam with stock cam timingDoes not require tuning509 SERIES GRIND CAMSStrongest from 1,000-4,500 rpm180 psi cranking compression;no need for compression releasesBolt-in cams for 88 CID engines with stock compression rationGreat low and mid-range torqueLower lift allows them to be bolted into stock 96”-106”06 engines with stock valve springs510 SERIES GRIND CAMS510G/510C cams are designed as bolt-in cam for 88”, 95”, 96”and 103”engines with compression ratios below 9.7:1Stock pushrods and valve springs acceptableStrongest from 3,000-5,000 rpm551 SERIES GRIND CAMSDesigned as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9More power across the rpm range, with improved low and midrange torqueStrongest from 1,000-4,000 rpmCan be used with stock pushrods, springs and lifters99-04 models require high lift springs
・HP103 SERIES GRIND CAMSBolt-in cam for 103” and 106” Big Bore Twin Cam motorsGreat for lighter bikes with strong power from 3500-6000 rpmUse with stock heads (up to 10.2 compression) and low restriction intake and exhaustMR103 CAMSBroad torque curve improves output over stock over the entire rpm rangeBolt-in cam for 103” Twin Cam motorsUse with stock heads and low restriction intake and exhaust475 SERIES GRIND CAMS (OES)Original equipment specificationsBolt-in cam with stock cam timingDoes not require tuning509 SERIES GRIND CAMSStrongest from 1,000-4,500 rpm180 psi cranking compression;no need for compression releasesBolt-in cams for 88 CID engines with stock compression rationGreat low and mid-range torqueLower lift allows them to be bolted into stock 96”-106”06 engines with stock valve springs510 SERIES GRIND CAMS510G/510C cams are designed as bolt-in cam for 88”, 95”, 96”and 103”engines with compression ratios below 9.7:1Stock pushrods and valve springs acceptableStrongest from 3,000-5,000 rpm551 SERIES GRIND CAMSDesigned as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9More power across the rpm range, with improved low and midrange torqueStrongest from 1,000-4,000 rpmCan be used with stock pushrods, springs and lifters99-04 models require high lift springs
・HP103 SERIES GRIND CAMSBolt-in cam for 103” and 106” Big Bore Twin Cam motorsGreat for lighter bikes with strong power from 3500-6000 rpmUse with stock heads (up to 10.2 compression) and low restriction intake and exhaustMR103 CAMSBroad torque curve improves output over stock over the entire rpm rangeBolt-in cam for 103” Twin Cam motorsUse with stock heads and low restriction intake and exhaust475 SERIES GRIND CAMS (OES)Original equipment specificationsBolt-in cam with stock cam timingDoes not require tuning509 SERIES GRIND CAMSStrongest from 1,000-4,500 rpm180 psi cranking compression;no need for compression releasesBolt-in cams for 88 CID engines with stock compression rationGreat low and mid-range torqueLower lift allows them to be bolted into stock 96”-106”06 engines with stock valve springs510 SERIES GRIND CAMS510G/510C cams are designed as bolt-in cam for 88”, 95”, 96”and 103”engines with compression ratios below 9.7:1Stock pushrods and valve springs acceptableStrongest from 3,000-5,000 rpm551 SERIES GRIND CAMSDesigned as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9More power across the rpm range, with improved low and midrange torqueStrongest from 1,000-4,000 rpmCan be used with stock pushrods, springs and lifters99-04 models require high lift springs
・HP103 SERIES GRIND CAMSBolt-in cam for 103” and 106” Big Bore Twin Cam motorsGreat for lighter bikes with strong power from 3500-6000 rpmUse with stock heads (up to 10.2 compression) and low restriction intake and exhaustMR103 CAMSBroad torque curve improves output over stock over the entire rpm rangeBolt-in cam for 103” Twin Cam motorsUse with stock heads and low restriction intake and exhaust475 SERIES GRIND CAMS (OES)Original equipment specificationsBolt-in cam with stock cam timingDoes not require tuning509 SERIES GRIND CAMSStrongest from 1,000-4,500 rpm180 psi cranking compression;no need for compression releasesBolt-in cams for 88 CID engines with stock compression rationGreat low and mid-range torqueLower lift allows them to be bolted into stock 96”-106”06 engines with stock valve springs510 SERIES GRIND CAMS510G/510C cams are designed as bolt-in cam for 88”, 95”, 96”and 103”engines with compression ratios below 9.7:1Stock pushrods and valve springs acceptableStrongest from 3,000-5,000 rpm551 SERIES GRIND CAMSDesigned as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9More power across the rpm range, with improved low and midrange torqueStrongest from 1,000-4,000 rpmCan be used with stock pushrods, springs and lifters99-04 models require high lift springs
・HP103 SERIES GRIND CAMSBolt-in cam for 103” and 106” Big Bore Twin Cam motorsGreat for lighter bikes with strong power from 3500-6000 rpmUse with stock heads (up to 10.2 compression) and low restriction intake and exhaustMR103 CAMSBroad torque curve improves output over stock over the entire rpm rangeBolt-in cam for 103” Twin Cam motorsUse with stock heads and low restriction intake and exhaust475 SERIES GRIND CAMS (OES)Original equipment specificationsBolt-in cam with stock cam timingDoes not require tuning509 SERIES GRIND CAMSStrongest from 1,000-4,500 rpm180 psi cranking compression;no need for compression releasesBolt-in cams for 88 CID engines with stock compression rationGreat low and mid-range torqueLower lift allows them to be bolted into stock 96”-106”06 engines with stock valve springs510 SERIES GRIND CAMS510G/510C cams are designed as bolt-in cam for 88”, 95”, 96”and 103”engines with compression ratios below 9.7:1Stock pushrods and valve springs acceptableStrongest from 3,000-5,000 rpm551 SERIES GRIND CAMSDesigned as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9More power across the rpm range, with improved low and midrange torqueStrongest from 1,000-4,000 rpmCan be used with stock pushrods, springs and lifters99-04 models require high lift springs
・HP103 SERIES GRIND CAMSBolt-in cam for 103” and 106” Big Bore Twin Cam motorsGreat for lighter bikes with strong power from 3500-6000 rpmUse with stock heads (up to 10.2 compression) and low restriction intake and exhaustMR103 CAMSBroad torque curve improves output over stock over the entire rpm rangeBolt-in cam for 103” Twin Cam motorsUse with stock heads and low restriction intake and exhaust475 SERIES GRIND CAMS (OES)Original equipment specificationsBolt-in cam with stock cam timingDoes not require tuning509 SERIES GRIND CAMSStrongest from 1,000-4,500 rpm180 psi cranking compression;no need for compression releasesBolt-in cams for 88 CID engines with stock compression rationGreat low and mid-range torqueLower lift allows them to be bolted into stock 96”-106”06 engines with stock valve springs510 SERIES GRIND CAMS510G/510C cams are designed as bolt-in cam for 88”, 95”, 96”and 103”engines with compression ratios below 9.7:1Stock pushrods and valve springs acceptableStrongest from 3,000-5,000 rpm551 SERIES GRIND CAMSDesigned as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9More power across the rpm range, with improved low and midrange torqueStrongest from 1,000-4,000 rpmCan be used with stock pushrods, springs and lifters99-04 models require high lift springs
・HP103 SERIES GRIND CAMSBolt-in cam for 103” and 106” Big Bore Twin Cam motorsGreat for lighter bikes with strong power from 3500-6000 rpmUse with stock heads (up to 10.2 compression) and low restriction intake and exhaustMR103 CAMSBroad torque curve improves output over stock over the entire rpm rangeBolt-in cam for 103” Twin Cam motorsUse with stock heads and low restriction intake and exhaust475 SERIES GRIND CAMS (OES)Original equipment specificationsBolt-in cam with stock cam timingDoes not require tuning509 SERIES GRIND CAMSStrongest from 1,000-4,500 rpm180 psi cranking compression;no need for compression releasesBolt-in cams for 88 CID engines with stock compression rationGreat low and mid-range torqueLower lift allows them to be bolted into stock 96”-106”06 engines with stock valve springs510 SERIES GRIND CAMS510G/510C cams are designed as bolt-in cam for 88”, 95”, 96”and 103”engines with compression ratios below 9.7:1Stock pushrods and valve springs acceptableStrongest from 3,000-5,000 rpm551 SERIES GRIND CAMSDesigned as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9More power across the rpm range, with improved low and midrange torqueStrongest from 1,000-4,000 rpmCan be used with stock pushrods, springs and lifters99-04 models require high lift springs
・HP103 SERIES GRIND CAMSBolt-in cam for 103” and 106” Big Bore Twin Cam motorsGreat for lighter bikes with strong power from 3500-6000 rpmUse with stock heads (up to 10.2 compression) and low restriction intake and exhaustMR103 CAMSBroad torque curve improves output over stock over the entire rpm rangeBolt-in cam for 103” Twin Cam motorsUse with stock heads and low restriction intake and exhaust475 SERIES GRIND CAMS (OES)Original equipment specificationsBolt-in cam with stock cam timingDoes not require tuning509 SERIES GRIND CAMSStrongest from 1,000-4,500 rpm180 psi cranking compression;no need for compression releasesBolt-in cams for 88 CID engines with stock compression rationGreat low and mid-range torqueLower lift allows them to be bolted into stock 96”-106”06 engines with stock valve springs510 SERIES GRIND CAMS510G/510C cams are designed as bolt-in cam for 88”, 95”, 96”and 103”engines with compression ratios below 9.7:1Stock pushrods and valve springs acceptableStrongest from 3,000-5,000 rpm551 SERIES GRIND CAMSDesigned as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9More power across the rpm range, with improved low and midrange torqueStrongest from 1,000-4,000 rpmCan be used with stock pushrods, springs and lifters99-04 models require high lift springs
・HP103 SERIES GRIND CAMSBolt-in cam for 103” and 106” Big Bore Twin Cam motorsGreat for lighter bikes with strong power from 3500-6000 rpmUse with stock heads (up to 10.2 compression) and low restriction intake and exhaustMR103 CAMSBroad torque curve improves output over stock over the entire rpm rangeBolt-in cam for 103” Twin Cam motorsUse with stock heads and low restriction intake and exhaust475 SERIES GRIND CAMS (OES)Original equipment specificationsBolt-in cam with stock cam timingDoes not require tuning509 SERIES GRIND CAMSStrongest from 1,000-4,500 rpm180 psi cranking compression;no need for compression releasesBolt-in cams for 88 CID engines with stock compression rationGreat low and mid-range torqueLower lift allows them to be bolted into stock 96”-106”06 engines with stock valve springs510 SERIES GRIND CAMS510G/510C cams are designed as bolt-in cam for 88”, 95”, 96”and 103”engines with compression ratios below 9.7:1Stock pushrods and valve springs acceptableStrongest from 3,000-5,000 rpm551 SERIES GRIND CAMSDesigned as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9More power across the rpm range, with improved low and midrange torqueStrongest from 1,000-4,000 rpmCan be used with stock pushrods, springs and lifters99-04 models require high lift springs
・HP103 SERIES GRIND CAMSBolt-in cam for 103” and 106” Big Bore Twin Cam motorsGreat for lighter bikes with strong power from 3500-6000 rpmUse with stock heads (up to 10.2 compression) and low restriction intake and exhaustMR103 CAMSBroad torque curve improves output over stock over the entire rpm rangeBolt-in cam for 103” Twin Cam motorsUse with stock heads and low restriction intake and exhaust475 SERIES GRIND CAMS (OES)Original equipment specificationsBolt-in cam with stock cam timingDoes not require tuning509 SERIES GRIND CAMSStrongest from 1,000-4,500 rpm180 psi cranking compression;no need for compression releasesBolt-in cams for 88 CID engines with stock compression rationGreat low and mid-range torqueLower lift allows them to be bolted into stock 96”-106”06 engines with stock valve springs510 SERIES GRIND CAMS510G/510C cams are designed as bolt-in cam for 88”, 95”, 96”and 103”engines with compression ratios below 9.7:1Stock pushrods and valve springs acceptableStrongest from 3,000-5,000 rpm551 SERIES GRIND CAMSDesigned as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9More power across the rpm range, with improved low and midrange torqueStrongest from 1,000-4,000 rpmCan be used with stock pushrods, springs and lifters99-04 models require high lift springs

[注意]

※ 取り扱い説明書は英語となります。
※ 輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※ Kits require high-performance valve springs (except 509G and 510G) when installed in 99-04 models.※ Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.※ Due to the inherent characteristics of gear drives, you may experience more valve train noise.※ Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.※ Exempt per Carb Executive Order (E.O.) D-355-14
※ Kits require high-performance valve springs (except 509G and 510G) when installed in 99-04 models.※ Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.※ Due to the inherent characteristics of gear drives, you may experience more valve train noise.※ Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.※ Exempt per Carb Executive Order (E.O.) D-355-14
※ Kits require high-performance valve springs (except 509G and 510G) when installed in 99-04 models.※ Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.※ Due to the inherent characteristics of gear drives, you may experience more valve train noise.※ Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.※ Exempt per Carb Executive Order (E.O.) D-355-14
※ Kits require high-performance valve springs (except 509G and 510G) when installed in 99-04 models.※ Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.※ Due to the inherent characteristics of gear drives, you may experience more valve train noise.※ Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.※ Exempt per Carb Executive Order (E.O.) D-355-14
※ Kits require high-performance valve springs (except 509G and 510G) when installed in 99-04 models.※ Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.※ Due to the inherent characteristics of gear drives, you may experience more valve train noise.※ Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.※ Exempt per Carb Executive Order (E.O.) D-355-14

適用車型

    • Street Glide-Injected - FLHX-I 2006
    • Street Glide - FLHX 2006
    • Softail Standard Injected - FXST I 2001 - 2006
    • Softail Standard - FXST 2000 - 2006
    • Softail Springer Injected - FXSTS I 2001 - 2006

商品評論

推薦商品

【CF POSH】凸輪鏈條導輪銷
凸輪鏈條導輪銷 CF POSH GORILLA
【M-Factory】MFR 強化油泵齒輪
MFR 強化油泵齒輪 M-Factory CYGNUS125
【J’s】汽缸下墊片
汽缸下墊片 J’s CB1100
【MIZUNO】加大活塞
加大活塞 MIZUNO KH250
【ADVANTAGE】特殊正時鏈條
特殊正時鏈條 ADVANTAGE GSX1300R HAYABUSA
【GUTS CHROME】TIMKEN 左曲軸軸承
TIMKEN 左曲軸軸承 GUTS CHROME SPORTSTER
【BULL DOCK】6速密齒比變速箱
6速密齒比變速箱 BULL DOCK
【ENDURANCE】機油尺
機油尺 ENDURANCE Z125 Pro
【KN企劃】PORT9 加大缸徑套件
PORT9 加大缸徑套件 KN企劃 BWs100 (Zuma)
【PMC】汽缸雙頭螺栓組
汽缸雙頭螺栓組 PMC 750SS (H2)
【PMC】汽缸頭螺帽組
汽缸頭螺帽組 PMC 750SS (H2)
【BORE ACE】凸輪螺釘
凸輪螺釘 BORE ACE
【BORE ACE】濾清器蓋
濾清器蓋 BORE ACE
【BORE ACE】機油箱用散熱片
機油箱用散熱片 BORE ACE
【BORE ACE】機油輔助
機油輔助 BORE ACE
【BORE ACE】専用腳踩起動桿
専用腳踩起動桿 BORE ACE
【BORE ACE】鏈條張緊器滾輪
鏈條張緊器滾輪 BORE ACE
【BORE ACE】減壓桿
減壓桿 BORE ACE