適用車型
[要點]
・1／16” (1.6 mm) 鋁合金
・高度 (每個) - 10” (25.4 cm)
・寬度 (每個) - 6.5” (16.5 cm)
・重量 (每個) - .25 lb (.11 kg)
・高度 (每個) - 10” (25.4 cm)
・寬度 (每個) - 6.5” (16.5 cm)
・重量 (每個) - .25 lb (.11 kg)
[商品描述]
在R 1200 GsW上增加了一個散熱器，為BMW備受推崇的冒險自行車帶來了很多興奮。
由1/16'(1.6毫米)陽極氧化鋁制成，散熱器保護罩可防止刺穿木棍和其他危險。特別設計的百葉窗可以阻擋錯誤的碎片，同時引導氣流通過散熱器，以保持散熱器的穩定。
散熱器防護罩與散熱器表面的間距至少為1/2'，以進一步確保空氣流通。市場上唯一的設計，使用一個堅固的4'安裝片來安裝，以均勻地分配任何沖擊力。螺栓固定護罩，插入護罩，然後重新安裝護罩。沒有墊片，也沒有需要添加的硬件，也不需要拆除護罩。
所有的altrider摩托車配件都是在美國設計和制造的。在引導氣流通過散熱器的同時，保護罩還能擋住碎片
.特別設計用於R1200GSW冒險之旅
.15分鍾。安裝使用OEM五金件
.1/16' (1.6 mm) 鋁合金
.高度(每個)-10' (25.4 cm)
.寬度(每個)-6.5' (16.5 cm)
.重量(每個)
可提供陽極氧化銀或黑色的產品。
由1/16'(1.6毫米)陽極氧化鋁制成，散熱器保護罩可防止刺穿木棍和其他危險。特別設計的百葉窗可以阻擋錯誤的碎片，同時引導氣流通過散熱器，以保持散熱器的穩定。
散熱器防護罩與散熱器表面的間距至少為1/2'，以進一步確保空氣流通。市場上唯一的設計，使用一個堅固的4'安裝片來安裝，以均勻地分配任何沖擊力。螺栓固定護罩，插入護罩，然後重新安裝護罩。沒有墊片，也沒有需要添加的硬件，也不需要拆除護罩。
所有的altrider摩托車配件都是在美國設計和制造的。在引導氣流通過散熱器的同時，保護罩還能擋住碎片
.特別設計用於R1200GSW冒險之旅
.15分鍾。安裝使用OEM五金件
.1/16' (1.6 mm) 鋁合金
.高度(每個)-10' (25.4 cm)
.寬度(每個)-6.5' (16.5 cm)
.重量(每個)
可提供陽極氧化銀或黑色的產品。
[注意]
[要點]
・1／16” (1.6 mm) aluminum
・Height (each) - 10” (25.4 cm)
・Width (each) - 6.5” (16.5 cm)
・Weight (each) - .25 lb (.11 kg)
・Height (each) - 10” (25.4 cm)
・Width (each) - 6.5” (16.5 cm)
・Weight (each) - .25 lb (.11 kg)
[商品描述]
The addition of a radiator on the R 1200 GSW has generated a lot of excitement for BMW’s respected adventure bike. Protect the new component with an AltRider Radiator Guard.
Made from 1／16” (1.6 mm) anodized aluminum， the radiator guard prevents sticks and other dangers from puncturing the heart of the cooling system. Specially designed louvers deflect errant debris， while simultaneously directing airflow through the radiator to keep the water boxer cool. The radiator guard is spaced a minimum 1／2” from the radiator face to further enable airflow.
The AltRider guard is the only design on the market to mount using a robust 4” mounting tab to evenly distribute any impact forces. Installation is a breeze - simply remove the three bolts holding the shroud in place， insert the guard， and reinstall the shroud. There are no spacers to deal with or hardware to add， and no need to remove the fairings. The perfect geometry of the guard exactly matches the contours of the shroud creating an exceptionally strong yet simple mount.
Available in anodized silver or black.
・All AltRider motorcycle accessories are 100% designed and manufactured in the USA
・2 piece guard deflects debris while directing airflow through radiator
・Specifically designed for use on the R1200GSW Adventure
・15 minute installation uses OEM hardware
・1／16” (1.6 mm) aluminum
・Height (each) - 10” (25.4 cm)
・Width (each) - 6.5” (16.5 cm)
・Weight (each) - .25 lb (.11 kg)
・Available in anodized silver or black
Made from 1／16” (1.6 mm) anodized aluminum， the radiator guard prevents sticks and other dangers from puncturing the heart of the cooling system. Specially designed louvers deflect errant debris， while simultaneously directing airflow through the radiator to keep the water boxer cool. The radiator guard is spaced a minimum 1／2” from the radiator face to further enable airflow.
The AltRider guard is the only design on the market to mount using a robust 4” mounting tab to evenly distribute any impact forces. Installation is a breeze - simply remove the three bolts holding the shroud in place， insert the guard， and reinstall the shroud. There are no spacers to deal with or hardware to add， and no need to remove the fairings. The perfect geometry of the guard exactly matches the contours of the shroud creating an exceptionally strong yet simple mount.
Available in anodized silver or black.
・All AltRider motorcycle accessories are 100% designed and manufactured in the USA
・2 piece guard deflects debris while directing airflow through radiator
・Specifically designed for use on the R1200GSW Adventure
・15 minute installation uses OEM hardware
・1／16” (1.6 mm) aluminum
・Height (each) - 10” (25.4 cm)
・Width (each) - 6.5” (16.5 cm)
・Weight (each) - .25 lb (.11 kg)
・Available in anodized silver or black
[注意]
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
問與答（0）
商品評論（0 ）
0/5