PAGE TOP

RaceFX

Pro系列 HCS 後齒盤

  • 商品編號:
  • FXRS 51-48 99ST

會員價: NT$ 1,769

點數: 18

    • 選擇商品形式:

請先選擇商品形式。

<< 您可在此選擇居住地區,以確認收到商品包裹之日期

適用車型:

SX85 03>On
TC85 14>On
查看更多

齒盤 銷售排行

商品詳細敘述

以下翻譯由Webike提供,若您想取消請點選顯示原文

[要點]

Material:HCS
重量:1.00kg
Bike Make:KTM
Bike Make:Husqvarna
Product Type:Sprocket - Rear

[商品描述]

RFX Pro Series Hi-Carbon Steel (HCS) sprockets are perfect for the rider looking for longevity and value for money from their sprockets while offering genuine quality not found elsewhere.
Certified Hi-Carbon Steel offers unbeatable wear properties and its added strength over mild steel allows for a lighter profile design, this means the weight increase over aluminium is kept to a minimum.
RFX HCS sprockets are precision Laser cut for more precision and tighter tolerances.

Pro Series HCS Sprocket Features
・Certified Hi-Carbon Steel
・CNC Laser Cut.
・CAD designed profile for lightness.
・Mud clearing grooves to reduce wear.
・Rigid design increases torsional strength.
・Tighter tolerances improve performance.


Fitting Instructions
・Start with bike on a stand with the rear wheel raised from the ground.
・Remove chain and wheel from bike.
・While holding the Hex key loosen the nuts with a spanner.
・Remove all nuts and old sprocket.
・Clean around the hub making sure clean and free of debris.
・Take the new sprocket and place on hub ensuring a nice snug fit making sure the bolt holes are in position.
・Clean sprocket bolts & nuts.
・Apply Blue Loctite to each bolt and insert in the holes.
・Thread nuts on to bolts by hand ensuring locking seals are intact and in good condition.
・Hold Hex key in place and tighten nuts even pattern.
・Torque nuts and bolts in accordance to your owner’s manual.
・Put wheel back in bike making sure chain is corrected aligned and tightened to manufacturer’s specification.

適用車型

    • SX85 03>On
    • TC85 14>On

適用車型改裝及用品

商品評論

推薦商品

【MOS】7075 鋁合金後齒盤 30T
7075 鋁合金後齒盤 30T MOS MSX125(GROM)
【WUKAWA】CNC 後齒盤
CNC 後齒盤 WUKAWA
【POSH】前齒外蓋離合器分幫底座
前齒外蓋離合器分幫底座 POSH CB1300ST
【SP武川】傳動齒33T(鋼)
傳動齒33T(鋼) SP武川 Ape 100 typeD
【KITACO】前齒 14T
前齒 14T KITACO Z125 Pro
【KITACO】後齒盤
後齒盤 KITACO Z125 Pro
【MISUMI ENGINIEERING】偏移型前齒盤用 墊片
偏移型前齒盤用 墊片 MISUMI ENGINIEERING XL1200C
【MISUMI ENGINIEERING】10輻 520 後齒盤
10輻 520 後齒盤 MISUMI ENGINIEERING XL1200C
【MISUMI ENGINIEERING】520 後齒盤
520 後齒盤 MISUMI ENGINIEERING XL1200C
【MISUMI ENGINIEERING】後齒盤
後齒盤 MISUMI ENGINIEERING
【MISUMI ENGINIEERING】520 皮帶輪
520 皮帶輪 MISUMI ENGINIEERING
【MISUMI ENGINIEERING】偏移型前齒盤
偏移型前齒盤 MISUMI ENGINIEERING SPORTSTER
【MISUMI ENGINIEERING】Wide 偏移型前齒盤
Wide 偏移型前齒盤 MISUMI ENGINIEERING
【MISUMI ENGINIEERING】5 Star Narrow 皮帶輪
5 Star Narrow 皮帶輪 MISUMI ENGINIEERING FLH
【MISUMI ENGINIEERING】W10 Spoke Narrow 皮帶輪
W10 Spoke Narrow 皮帶輪 MISUMI ENGINIEERING SOFTAIL
【CF POSH】後齒盤螺帽
後齒盤螺帽 CF POSH MONKEY
【CF POSH】前齒盤
前齒盤 CF POSH APE50
【CF POSH】強化鋁合金後齒盤
強化鋁合金後齒盤 CF POSH MONKEY BAJA
【SP武川】後齒盤
後齒盤 SP武川 XE75
.