PAGE TOP

RaceFX

Pro 油門套管

  • 商品編號:
  • FXTT 50500 99BK

會員價: NT$ 1,728

點數: 17

查詢中...

<< 您可在此選擇居住地區,以確認收到商品包裹之日期

適用車型:

TC125 17-
TC250 17-
SX125 17-
SX150 17-
SX250 17-
查看更多

其他轉向系統相關零件 銷售排行

商品詳細敘述

以下翻譯由Webike提供,若您想取消請點選顯示原文

[要點]

Material:Hard anodised billet aluminium
Color:Black
Material:Aluminium
重量:0.10kg
Bike Make:KTM
Bike Make:Husqvarna

[商品描述]

New 2016 model now includes Two Optional Inserts, which ensure you can fit the throttle tube to the following bars.
RFX F7/F8
Renthal Twinwall
Renthal Fatbar, Pro Taper, Magura, Neken.

RFX Pro Series Throttle Tubes are machined from billet aluminium and feature a sealed bearing and Teflon sleeve to provide an effortless throttle action.
RFX Pro Series Tubes resist damage in a crash unlike standard plastic tubes.
For these reasons they are used by many of the top race teams and riders in the U.K Championships such as STR KTM.

・Replacement throttle tubes for all popular off road bikes.
・Uses the same cam profile as the OEM part for proper throttle control.
・Hard anodised billet aluminium construction.
・Sealed ball bearing and Teflon sleeve virtually eliminate friction.
・Laser etched with RFX logo.
・Knurled grip mounted area.
・Reduced chance of damage if you crash.

Fitting Instructions
・Slide the rubber boot down and disassemble the throttle housing, remove the old throttle tube taking care not to damage the throttle cables.
・Carefully remove grip from the old throttle tube if required.
・Inspect the cables and housing for excess damage or wear, clean and lube them or replace if required.
・Clean the handlebar and inspect for damage where the old throttle tube has been spinning on the bar if a ridge is present replace the handlebars.
・Slide the new throttle tube on the handlebar and lube using a penetrating lubricant preferably Maxima MPPL (do not use grease as this attracts dirt and makes the throttle stick after a short period of time).
・Re-assemble the throttle cables and housing again using some penetrating lubricant.
・Tighten the throttle housing in the correct position on the handlebars.
・Adjust the cable to the required (free play amount) of your liking.
・Rotate the handlebars to their maximum position to check proper operation of the throttle and correct cable routing, some re-adjustment of the cable may be required.
・Slide the rubber boot back over the housing.
・Cover the hole in the end of the grip with some electrical tape (To stop glue entering the throttle barrel) and apply a small amount of RFX grip glue to the outer end of the throttle tube on the outside diameter.
・Apply a small amount of RFX grip glue to the inside of the new grip and slide onto the tube.
・Twist the grip to the correct position and leave to dry.
・Apply RFX safety grip wire if needed.
・After the glue has dried again check proper operation of the throttle.

適用車型

    • TC125 17-
    • TC250 17-
    • SX125 17-
    • SX150 17-
    • SX250 17-

適用車型改裝及用品

商品評論

推薦商品

【GUTS CHROME】KustomTech 油門座外殼
KustomTech 油門座外殼 GUTS CHROME
【ZERO DESIGN WORKS】三角台用 軸心螺帽
三角台用 軸心螺帽 ZERO DESIGN WORKS
【ZERO DESIGN WORKS】三角台用 附蓋螺帽
三角台用 附蓋螺帽 ZERO DESIGN WORKS
【N PROJECT】把手固定座(M5・M6)
把手固定座(M5・M6) N PROJECT
【KIJIMA】把手增高固定座
把手增高固定座 KIJIMA FXSBSE
【KIJIMA】把手增高墊片
把手增高墊片 KIJIMA FXSBSE
【TTS】把手止檔器
把手止檔器 TTS NINJA250
【RSD Roland Sands Design】離合器拉索固定座 (對比色)
離合器拉索固定座 (對比色) RSD Roland Sands Design
【MADMAX】CNC 離合器拉索固定座
CNC 離合器拉索固定座 MADMAX MSX125(GROM)
【MADMAX】CNC 煞車主缸固定蓋
CNC 煞車主缸固定蓋 MADMAX MSX125(GROM)
【MADMAX】三角台裝央螺絲
三角台裝央螺絲 MADMAX MSX125(GROM)
【M-SOUL】Go Works製 鋁合金把手座
Go Works製 鋁合金把手座 M-SOUL SMAX (Majesty S)
【ZETA】把手間隙片
把手間隙片 ZETA NINJA250R
【ZETA】把手增高套件
把手增高套件 ZETA CBR250R
【田中商會】鋁合金三角台
鋁合金三角台 田中商會 MSX125(GROM)
【Mr.Don彌生】龍頭外蓋
龍頭外蓋 Mr.Don彌生 TMAX530
【Mr.Don彌生】把手座上蓋
把手座上蓋 Mr.Don彌生 TMAX530
【ZETA】拉桿保護桿
拉桿保護桿 ZETA NINJA ZX-14R
【ZETA】把手固定座
把手固定座 ZETA
.