![【Dynojet】POWER COMMANDER V 燃油噴射控制模組 [1020-2947]| Webike摩托百貨](https://webike-cdn-net.azureedge.net/catalogue/images/81831/1DFB9E00-4E47-4F96-BBDF-00B7C8E982FB_s.jpg "【Dynojet】POWER COMMANDER V 燃油噴射控制模組 [1020-2947]| Webike摩托百貨")
適用車型
[要點]
底色:黑色,紅色
顏色/外觀:黑色,紅色
功能:USB供電
型號:power commander v
氧回路控制:開環
。
物理連接:插入式(oem式連接器)
產品名稱:帶點火調節功能的燃油噴射模塊
編程:預置式編程,可編程
騎行風格:街道
單位:每個
。
顏色/外觀:黑色,紅色
功能:USB供電
型號:power commander v
氧回路控制:開環
。
物理連接:插入式(oem式連接器)
產品名稱:帶點火調節功能的燃油噴射模塊
編程:預置式編程,可編程
騎行風格:街道
單位:每個
。
[商品描述]
'.在一個小圍欄內對每個氣缸進行燃料控制
。此外，還可以使用
中內置的雙位置映射切換功能。任何單極單擲（spst）開關，並在兩個不同的燃油地圖之間切換
.齒輪/速度輸入允許根據齒輪調整地圖
.指揮官v能夠允許每個氣缸單獨映射，並為每個齒輪連接齒輪位置輸入
。
.增強了'加速泵'的實用性
.適用於越野車和ATV，請參見相應目錄下的moose power commanders
.made.在美國，
第二燃料模塊
。"基本 "模式允許您擁有一個單一的燃料表，只需將所要求的燃料變化放在 "基本 "模式下。允許同時調整所有八個噴油器
.八個噴油器自行車上的快速換擋傳感器，提供了額外的燃油控制和換擋功能
您還可以映射每個噴油器。此外，還可以調整信號的電平，使其與輸入信號相匹配。'基本'模式是PCv
單線連接到pcv
單線連接到pcv
單線連接到pcv。對於需要比四噴油器提供更多燃料的改裝發動機來說，這是一個完美的設置。每一個齒輪都是單獨的
.使用oem連接器連接到上噴油器軌道
.見應用表的可用性
快變速器擴展模塊
qem允許dynojet快速變速器傳感器與power commander v一起使用在有八個噴油器的自行車上
。一旦傳感器被連接，你將有完整的快速換擋功能
.QEM連接到上部噴油器，然後進入PCV
。此外，還可以使用
中內置的雙位置映射切換功能。任何單極單擲（spst）開關，並在兩個不同的燃油地圖之間切換
.齒輪/速度輸入允許根據齒輪調整地圖
.指揮官v能夠允許每個氣缸單獨映射，並為每個齒輪連接齒輪位置輸入
。
.增強了'加速泵'的實用性
.適用於越野車和ATV，請參見相應目錄下的moose power commanders
.made.在美國，
第二燃料模塊
。"基本 "模式允許您擁有一個單一的燃料表，只需將所要求的燃料變化放在 "基本 "模式下。允許同時調整所有八個噴油器
.八個噴油器自行車上的快速換擋傳感器，提供了額外的燃油控制和換擋功能
您還可以映射每個噴油器。此外，還可以調整信號的電平，使其與輸入信號相匹配。'基本'模式是PCv
單線連接到pcv
單線連接到pcv
單線連接到pcv。對於需要比四噴油器提供更多燃料的改裝發動機來說，這是一個完美的設置。每一個齒輪都是單獨的
.使用oem連接器連接到上噴油器軌道
.見應用表的可用性
快變速器擴展模塊
qem允許dynojet快速變速器傳感器與power commander v一起使用在有八個噴油器的自行車上
。一旦傳感器被連接，你將有完整的快速換擋功能
.QEM連接到上部噴油器，然後進入PCV
[注意]
產品的規格可能會被制造商改變。請注意，我們沒有任何這方面的信息。
※ 使用說明書為英文。
※ 由於進口材料的原因，交貨期可能會延遲。先謝謝你的理解。
※ 使用說明書為英文。
※ 由於進口材料的原因，交貨期可能會延遲。先謝謝你的理解。
[要點]
Base Color：Black，Red
Color／Finish：Black，Red
Feature：USB Powered
Model：Power Commander V
Oxygen Loop Control：Open Loop
Physical Connection：Plug-In (OEM Style Connectors)
Product Name：Fuel Injection Module with Ignition Adjustment
Programming：Pre-Programmed，Programmable
Riding Style：Street
Units：Each
Color／Finish：Black，Red
Feature：USB Powered
Model：Power Commander V
Oxygen Loop Control：Open Loop
Physical Connection：Plug-In (OEM Style Connectors)
Product Name：Fuel Injection Module with Ignition Adjustment
Programming：Pre-Programmed，Programmable
Riding Style：Street
Units：Each
[商品描述]
・Fuel control for each individual cylinder in a smaller enclosure
・“Warm-up”fuel adjustment (unit reads engine temp and allows fuel／timing adjustments based on the reading)
・Reduced size from the PCIII USB
・Easy to install
・USB powered from computer；9 volt adapter is no longer needed
・Two-position map-switching function built in
・Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
・Gear／speed input allows for map adjustment based on gear
・Analog input allows user to install any 0-5 volt sensor
・Build an adjustment table based on analog input such as boost or temperature
・Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
・More tuning ranges than PCIII USB
・Enhanced“accel pump”utility
・For Offroad and ATV，see appropriate catalog under Moose Power Commanders
・Made in the U.S.A.
SECONDARY FUEL MODULE
・The“basic”mode allows you to have a single fuel table that simply puts the requested fuel change in both upper and lower injector modules at the same time
・Allows for the adjustment of all eight-injectors
・Allows for the use of the Dynojet Quick Shifter sensor on eight-injector bikes which provides added fuel control and shifter functionality
・You can also map each injector separately，giving you up to 48 complete maps
・Adjusts both upper and lower injectors by as much as ＋250／-100％
・If gear position input is connected to your PCV，you can adjust all of the injectors on a“per gear”basis
・Single cable connection to the PCV
・The“basic”mode is the perfect setting for modified engines that require more fuel than four-injectors can provide，but do not need the complexity of mapping each cylinder and each gear separately
・Connects to the upper injector rail using OEM connectors
・See application chart for availability
QUICK SHIFTER EXPANSION MODULE
・The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors
・Once the sensor is attached you will have full Quick Shifter functionality
・The QEM connects to the upper injectors and then into the PCV
・“Warm-up”fuel adjustment (unit reads engine temp and allows fuel／timing adjustments based on the reading)
・Reduced size from the PCIII USB
・Easy to install
・USB powered from computer；9 volt adapter is no longer needed
・Two-position map-switching function built in
・Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
・Gear／speed input allows for map adjustment based on gear
・Analog input allows user to install any 0-5 volt sensor
・Build an adjustment table based on analog input such as boost or temperature
・Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
・More tuning ranges than PCIII USB
・Enhanced“accel pump”utility
・For Offroad and ATV，see appropriate catalog under Moose Power Commanders
・Made in the U.S.A.
SECONDARY FUEL MODULE
・The“basic”mode allows you to have a single fuel table that simply puts the requested fuel change in both upper and lower injector modules at the same time
・Allows for the adjustment of all eight-injectors
・Allows for the use of the Dynojet Quick Shifter sensor on eight-injector bikes which provides added fuel control and shifter functionality
・You can also map each injector separately，giving you up to 48 complete maps
・Adjusts both upper and lower injectors by as much as ＋250／-100％
・If gear position input is connected to your PCV，you can adjust all of the injectors on a“per gear”basis
・Single cable connection to the PCV
・The“basic”mode is the perfect setting for modified engines that require more fuel than four-injectors can provide，but do not need the complexity of mapping each cylinder and each gear separately
・Connects to the upper injector rail using OEM connectors
・See application chart for availability
QUICK SHIFTER EXPANSION MODULE
・The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors
・Once the sensor is attached you will have full Quick Shifter functionality
・The QEM connects to the upper injectors and then into the PCV
[注意]
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
※ 取り扱い説明書は英語となります。
※ 輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※ QEM is not necessary if using the SFM.
※ 取り扱い説明書は英語となります。
※ 輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※ QEM is not necessary if using the SFM.
問與答（0）
商品評論（0 ）
0/5