適用車型
[要點]
顏色：黑色
[商品描述]
冒險的路線對您來說很有趣，但可能會對您的發動機造成威脅。
由3/16英寸（4.75毫米）陽極氧化鋁制成，防滑板提供覆蓋油過濾器，熱它與您的自行車底部緊密貼合，以保護您的自行車，而不會犧牲地面間隙。該設計將四個法蘭納入其形狀，創造了一個堅固的作品，以轉移危險的碎片從你的自行車。還包括一個3/16英寸(4.75毫米)的不銹鋼支架，用於安裝，而且它還包括一個3/16英寸(4.75毫米)的不銹鋼支架。該支架可延長橡膠支架的使用壽命，在顛簸的騎行中提供額外的緩沖。
無論您在哪里騎行，您都可以放心地繼續前行。
可選擇銀色和黑色
兼容2013年及更新的款式。
.兼容原廠中控台
.兼容原廠防撞桿
.可在更換機油濾清器時保持安裝狀態
.可在更換機油濾清器時保持安裝狀態。已確認可搭配givi防撞桿
.極輕的鋁制結構，沒有厚重的鋼筋
.唯一的設計是放射狀的角
.在設計上，只有一個角。/>6個安裝點，分散沖擊力
.安裝方便，連前螺母都是焊接的。歸宿
由3/16英寸（4.75毫米）陽極氧化鋁制成，防滑板提供覆蓋油過濾器，熱它與您的自行車底部緊密貼合，以保護您的自行車，而不會犧牲地面間隙。該設計將四個法蘭納入其形狀，創造了一個堅固的作品，以轉移危險的碎片從你的自行車。還包括一個3/16英寸(4.75毫米)的不銹鋼支架，用於安裝，而且它還包括一個3/16英寸(4.75毫米)的不銹鋼支架。該支架可延長橡膠支架的使用壽命，在顛簸的騎行中提供額外的緩沖。
無論您在哪里騎行，您都可以放心地繼續前行。
可選擇銀色和黑色
兼容2013年及更新的款式。
.兼容原廠中控台
.兼容原廠防撞桿
.可在更換機油濾清器時保持安裝狀態
.可在更換機油濾清器時保持安裝狀態。已確認可搭配givi防撞桿
.極輕的鋁制結構，沒有厚重的鋼筋
.唯一的設計是放射狀的角
.在設計上，只有一個角。/>6個安裝點，分散沖擊力
.安裝方便，連前螺母都是焊接的。歸宿
[注意]
*注：該防滑板通過使用原廠防震支架安裝。這些支座允許在一定負荷下受到沖擊的壓縮，在最大壓縮點上，它們會發生剪切，以挽救電機。手頭最好多准備幾個，在這里購買單個或多個備用隔震支架。
[要點]
・4.78 MM thick Aluminum
・Height: 19 inches
・Width: 14 inches
・Depth: 8 inches
・Weight: 5 lbs
・Height: 19 inches
・Width: 14 inches
・Depth: 8 inches
・Weight: 5 lbs
[商品描述]
Adventurous routes are fun for you， but can pose a threat to your engine. Protect it in style from rocks， dirt and kicked up debris by installing the AltRider Skid Plate for the BMW F 800 GS.
Made of 3／16 inch (4.75 mm) anodized aluminum， the skid plate offers coverage to the oil filter， heat exchanger and header pipe. It closely conforms to the underside of your bike for protection that doesn’t sacrifice ground clearance.
This design incorporates four flanges into its shape， creating a robust piece that deflects dangerous debris from your bike. It attaches with OEM fasteners that are completely protected， eliminating the possibility of snags. A 3／16 inch (4.75 mm) stainless steel bracket is also included for mounting， and it maintains the BMW rubber mounts for ensured motor safety. The bracket extends the life of the rubber mounts by providing an extra cushion on bumpy rides， while also keeping the skid plate from twisting and shearing the mounts.
No matter where you ride， you can keep going without worry by installing the AltRider Skid Plate for the BMW F 800 GS.
Available in Silver and Black
Compatible with restyled 2013 and newer models.
・Compatible with OEM center stand
・Compatible with OEM crash bars
・Can remain installed while changing oil filter
・Confirmed to fit with Givi crash bars
・Extremely lightweight Aluminum Construction， no heavy steel
・Only design with radiused corners
・The original Corrugated design: Simple strong
・6 mounting points to distribute impact
・Easy to install; even the front nut is welded in place for you
Made of 3／16 inch (4.75 mm) anodized aluminum， the skid plate offers coverage to the oil filter， heat exchanger and header pipe. It closely conforms to the underside of your bike for protection that doesn’t sacrifice ground clearance.
This design incorporates four flanges into its shape， creating a robust piece that deflects dangerous debris from your bike. It attaches with OEM fasteners that are completely protected， eliminating the possibility of snags. A 3／16 inch (4.75 mm) stainless steel bracket is also included for mounting， and it maintains the BMW rubber mounts for ensured motor safety. The bracket extends the life of the rubber mounts by providing an extra cushion on bumpy rides， while also keeping the skid plate from twisting and shearing the mounts.
No matter where you ride， you can keep going without worry by installing the AltRider Skid Plate for the BMW F 800 GS.
Available in Silver and Black
Compatible with restyled 2013 and newer models.
・Compatible with OEM center stand
・Compatible with OEM crash bars
・Can remain installed while changing oil filter
・Confirmed to fit with Givi crash bars
・Extremely lightweight Aluminum Construction， no heavy steel
・Only design with radiused corners
・The original Corrugated design: Simple strong
・6 mounting points to distribute impact
・Easy to install; even the front nut is welded in place for you
[注意]
※ Note： This skid plate installs via use of OEM Vibration Isolation Mounts. Vibration Isolation Mounts are designed to fail before any damage is caused to the bike. These mounts allow for compression from impacts up to a certain load， at the maximum point of compression they will shear in order to save the motor from damage. It is always a good idea to have a few extra on hand， buy single or multiple spare vibration isolation mounts here.
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
問與答（0）
商品評論（0 ）
0/5