PAGE TOP

【S&S CYCLE】汽缸頭温度感應器/ T.C. 【CYL.H.TEMP.SENSOR T.C. [55-1014]】

  • 【S&S CYCLE】汽缸頭温度感應器/ T.C. 【CYL.H.TEMP.SENSOR T.C. [55-1014]】 - 「Webike-摩托百貨」

會員價: NT$ 4,667

點數: 47
定價: NT$ 5,185

    • 商品編號:
    • 55-1014

查詢中...

<< 您可在此選擇居住地區,以確認收到商品包裹之日期

信用卡分期(支持13大發卡銀行,請參閱"信用卡分期說明")。

商品詳細敘述

以下翻譯由google提供,若您想取消請點選顯示原文

[要點]

MADE IN THE U.S.A.:Yes
MODEL:IST Ignition System
PACKAGING:Each
SPECIFIC APPLICATION:No
STYLE:Replacement
TYPE:Temperature Sensor
VOLTAGE:12V

[商品描述]

・The S&S system makes use of crank position sensor, cam position sensor if present, MAP sensor, cylinder head temperature sensor and an exclusive knock sensor that detects detonation or knock while the engine runs
・Knock sensor allows the ECU to automatically adjust ignition timing to eliminate knock whenever it occurs
・Optimizes power and fuel economy
・The Intelligent Spark Technology Ignition Module requires an installation kit that must be purchased separately
・Optional high-output coil also available: designed for the S&S Variable Fuel Injection System, the single-fire coil is actually two separate coils in a single package;coil impedance 3 ohm per coil (sold separately)
・Made in the U.S.A.

[注意]

※ 取り扱い説明書は英語となります。
※ 輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※ Not for fuel-injected models.※ Not recommended for kick start applications unless a cam position sensor is used. Engines using crankshaft position sensors will be difficult to kick start.※ S&S IST ignition modules manufactured after 10-1-03 (serial number begins with "E" or higher letter) already contain software to support the Guardian Diagnostic System. These modules will work in all applications except 2004-05. Modules manufactured after 10-1-05 (serial number begins with "G" or higher letter) are compatible with 04-05 models in addition to the other specified applications.
※ Not for fuel-injected models.※ Not recommended for kick start applications unless a cam position sensor is used. Engines using crankshaft position sensors will be difficult to kick start.※ S&S IST ignition modules manufactured after 10-1-03 (serial number begins with "E" or higher letter) already contain software to support the Guardian Diagnostic System. These modules will work in all applications except 2004-05. Modules manufactured after 10-1-05 (serial number begins with "G" or higher letter) are compatible with 04-05 models in addition to the other specified applications.
※ Not for fuel-injected models.※ Not recommended for kick start applications unless a cam position sensor is used. Engines using crankshaft position sensors will be difficult to kick start.※ S&S IST ignition modules manufactured after 10-1-03 (serial number begins with "E" or higher letter) already contain software to support the Guardian Diagnostic System. These modules will work in all applications except 2004-05. Modules manufactured after 10-1-05 (serial number begins with "G" or higher letter) are compatible with 04-05 models in addition to the other specified applications.

商品評論

推薦商品

【ACTIVE】圓型機油冷卻器套件
圓型機油冷卻器套件 ACTIVE R nineT
【Dzell】水箱護罩/網
水箱護罩/網 Dzell NC700X
【黑珍珠】頂級水箱精
頂級水箱精 黑珍珠
【ENDURANCE】散熱器蓋
散熱器蓋 ENDURANCE PCX150
【BEET】散熱器護罩
散熱器護罩 BEET ZRX1200
【BORE ACE】通氣軟管
通氣軟管 BORE ACE
【BORE ACE】油氣回收單體
油氣回收單體 BORE ACE
【BORE ACE】油管用散熱片
油管用散熱片 BORE ACE
【KN企劃】通氣軟管
通氣軟管 KN企劃
【K’s-STYLE】散熱器水箱護罩
散熱器水箱護罩 K’s-STYLE Ninja 250SL
【A-TECH】水箱護罩 STD
水箱護罩 STD A-TECH NINJA ZX-10R
【A-TECH】水箱護罩 Type R
水箱護罩 Type R A-TECH NINJA ZX-10R
【MORIN】機油冷卻器套件
機油冷卻器套件 MORIN ZOOMER X