[要點]
美麗鄉村建設。 這是
型號:雙掃圖3 abs
具體應用流程:樣式:商家
類型:診斷分析法
。
[商品描述]
·與ecm、tssm、bcm溝通閱讀,明確診斷故障代碼
·激活abs螺線管,進行適當的制動出血和測試
·發動機傳感器實時顯示,內置數據日志,數據存儲時間長達1小時
·設置故障代碼時自動觸發數據日志記錄,顯示代碼設置前後的數據
·# 3807 - 0249的一部分包括兩個模擬輸入0-20 v或±200 v范圍以及兩個通道示波器波形顯示功能
·模擬輸入也可用於空氣 / 流動比率 (誤判率)
·軟件操作簡單
·需要使用裝有windows7、windows8或windows10的pc進行顯示
·使用探針組件#3807-0189使用scopemeter功能;包括兩個絕緣穿刺探頭和12v電源適配器
·使用第1022-0008號零件替換bosch o2傳感器 (每個都賣)
·美國制造. s. 一個。
[注意]
*說明書是用英文書寫的。
*請注意,由於是進口產品,交貨期可能會延遲。
*配備12mm氧傳感器的型號需要在排氣系統中安裝18mm焊縫螺母,以配合雙掃描3+ kit 18mm氧傳感器使用。
[要點]
U.S.A.製:○
モデル:TWIN SCAN 3 ABS
専用設計:-
スタイル:ショップ
タイプ:診断アナライザ
MADE IN THE U.S.A.:Yes
MODEL:Twin Scan 3 ABS
SPECIFIC APPLICATION:No
STYLE:Shop
TYPE:Diagnostic Analyzer
[商品描述]
・Communicates with ECM, TSSM and BCM to read, then clear diagnostic trouble codes
・Activate ABS solenoids for proper brake bleeding and testing
・Real time display of engine sensors along with built in data logging will store data for up to one hour
・Data logging automatically trigged when a trouble code is set and shows the data before and after code is set
・PART #3807-0249 includes two analog inputs with 0-20V or ±200V range as well as two channel oscilloscope capability for waveform display
・Analog inputs can also be used for air/flow ratio (AFR)
・Easy to navigate software
・Requires use of a PC with Windows 7, Windows 8 or Windows 10 for display
・Use probe kit PART #3807-0189 to use scopemeter function; includes two insulation-piercing probes and 12V power adapters
・Use PART #1022-0008 for replacement Bosch O2 sensor (sold each)
・Made in the U.S.A.
[注意]
※ 取り扱い説明書は英語となります。
※ 輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※ Models equipped with 12mm oxygen sensors will require 18mm weld nuts be installed in the exhaust system for use with the Twin Scan 3+ kit 18mm oxygen sensors.