適用車型
[要點]
・不銹鋼結構
・加強保護用兩段3／16吋(4.75mm)保護桿
・尼龍塗層防止刮傷
・使用OEM固定件
・高度： 2 吋
・寬度： 5.1 吋
・深度： 10.3 吋
・重量： 0.5 磅
・加強保護用兩段3／16吋(4.75mm)保護桿
・尼龍塗層防止刮傷
・使用OEM固定件
・高度： 2 吋
・寬度： 5.1 吋
・深度： 10.3 吋
・重量： 0.5 磅
[商品描述]
如果燃油噴射器損壞，你的BMW R 1200 GSA就無法工作，所以用Altrider燃油噴射器保護器來保護它。堅固的3/16英寸（4.75毫米）不銹鋼棒的部分，組件的三角形設計加強了保護器的強度。
The altrider fuel and the altrider fuel is the most important source of the new energy.噴油器保護器在安裝過程中不會劃傷自行車，因為連接到車架的一端塗有耐用的尼龍塗層，並將保護噴油器。油冷式BMW R 1200 Gs adventure 車型
2009年及更早的GSA車型不需要此特殊套件。在此購買標准的噴油器護罩。
套裝部件: ALTRIDER 噴油器保護器 (2003-2012) (1)
The altrider fuel and the altrider fuel is the most important source of the new energy.噴油器保護器在安裝過程中不會劃傷自行車，因為連接到車架的一端塗有耐用的尼龍塗層，並將保護噴油器。油冷式BMW R 1200 Gs adventure 車型
2009年及更早的GSA車型不需要此特殊套件。在此購買標准的噴油器護罩。
套裝部件: ALTRIDER 噴油器保護器 (2003-2012) (1)
[注意]
在安裝人員必須臨時拆除的情況下，需要進行特殊安裝。注射器。
[要點]
・Stainless steel construction
・Reinforced protection with two sections of 3／16 inch (4.75 mm) rod
・Nylon coating prevents scratches
・Utilizes OEM fasteners
・Height: 2 inches
・Width: 5.1 inches
・Depth: 10.3 inches
・Weight: 0.5 lbs
・Reinforced protection with two sections of 3／16 inch (4.75 mm) rod
・Nylon coating prevents scratches
・Utilizes OEM fasteners
・Height: 2 inches
・Width: 5.1 inches
・Depth: 10.3 inches
・Weight: 0.5 lbs
[商品描述]
Your BMW R 1200 GSA can’t function if your fuel injector is damaged， so protect it with the AltRider Fuel Injector Protector. Manufactured with two sections of robust 3／16 inch (4.75 mm) stainless rod， the triangular design of the assembly reinforces the strength of the protector. It connects using OEM fasteners and provides coverage for both the fuel line and the nearby connectors， so you can have a worry-free ride.
The AltRider Fuel Injector Protector won’t scratch the bike during installation， because the end that attaches to the frame is coated in durable nylon， and will protect the paint even if they contact. The protector comes in a shot peen finish to provide you with both the look and protection you need.
For the 2010-2013 oil cooled BMW R 1200 GS Adventure models
2009 and Older GSA models do not require this special kit. Buy the standard set of injector guards here.
Kit Parts: AltRider Injector Protector for the BMW R 1200 GS (2003-2012) (1)
The AltRider Fuel Injector Protector won’t scratch the bike during installation， because the end that attaches to the frame is coated in durable nylon， and will protect the paint even if they contact. The protector comes in a shot peen finish to provide you with both the look and protection you need.
For the 2010-2013 oil cooled BMW R 1200 GS Adventure models
2009 and Older GSA models do not require this special kit. Buy the standard set of injector guards here.
Kit Parts: AltRider Injector Protector for the BMW R 1200 GS (2003-2012) (1)
[注意]
※ Note： Interference will occur when used with AltRider Potentiometer Guard. Special installation required where installer must temporarily remove injector.
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
問與答（0）
商品評論（0 ）
0/5