快速出貨 在庫推薦
快速出貨
快速出貨
DAYTONA
側馬鞍包支架 GB350 (21-)
快速出貨
快速出貨
HONDA
馬鞍包支架 REBEL500 (19-) 等車款
快速出貨
DAYTONA
左側馬鞍包支架 CT125 (20-22)
快速出貨
DAYTONA
馬鞍包支架 CC110 (18-) 等車款
快速出貨
KIJIMA
右側馬鞍包支架 CC110 (18-) 等車款
快速出貨
KIJIMA
馬鞍包支架 REBLE500 (17-21) 等車款
快速出貨
KIJIMA
馬鞍箱包支架 REBEL1100 (21-)
快速出貨
快速出貨
KIJIMA
側掛包支架
快速出貨
G-Craft
小型車包專用支架 CT125 / MONKEY125
快速出貨
ENDURANCE
側包支架 Z650RS (22-)
快速出貨
KIJIMA
馬鞍箱包支架組 Z650RS (22-)
快速出貨
KITACO
側馬鞍包支架 CT125(20-)
快速出貨
HONDA
KEYLESS 開蓋器 X-ADV (21-)
快速出貨
快速出貨
DAYTONA
馬鞍包支架 W800 (11-21) 等車款
適用車型
[商品描述]
為BMW R 1200 Gs設計的altrider後座車架可能是市場上最通用的，它具有五種不同的安裝配置，幾種不同的安裝方式。Rotopax燃油箱的附件選項，Givi monokey頂箱系統的接口（需要Givi頂箱安裝套件）和gsessories尾翼的接口。這樣就可以方便地將動作相機安裝在完美的位置，而不需要槍手箱，四個獨立的安裝點可以用來安裝柱塞球支架。你可以決定帶着大量的行李或帶着後備箱騎行，而行李架可以滿足你的需求，在你的行李架上，你可以看到你的行李。
雖然可以單獨使用，但altrider行李架系統中的兩個行李架最好一起使用。多樣化的剪裁，使其易於捆綁、固定或鉤住包包。這款架子的表面處理非常出色，所有的倒角切割都使得四周的邊緣都很光滑。 安裝方法後排座椅架的安裝和釋放方式與後排座椅相同，只需用鑰匙即可，因此不需要額外的工具。目前市場上還沒有一款機架系統可以在同一產品中提供所有這些配置。有了altrider解決方案，騎手現在可以
givi monokey頂箱可以安裝givi安裝套件--不需要額外安裝的行李系統。
采用3/16英寸（4.75毫米）厚的陽極氧化鋁制成
。與givi monokey頂箱系統連接（需要givi頂箱安裝套件）
與rotopax燃油系統連接
與柱塞球支架連接。
...有銀色和黑色兩種顏色可供選擇
...高度：2英寸
...寬度：15英寸
...深度：17英寸
...重量：3磅
...本產品可以是只有在拆除了原廠不銹鋼行李架的情況下，才會安裝在R 1200 Gs Adventure上。
雖然可以單獨使用，但altrider行李架系統中的兩個行李架最好一起使用。多樣化的剪裁，使其易於捆綁、固定或鉤住包包。這款架子的表面處理非常出色，所有的倒角切割都使得四周的邊緣都很光滑。 安裝方法後排座椅架的安裝和釋放方式與後排座椅相同，只需用鑰匙即可，因此不需要額外的工具。目前市場上還沒有一款機架系統可以在同一產品中提供所有這些配置。有了altrider解決方案，騎手現在可以
givi monokey頂箱可以安裝givi安裝套件--不需要額外安裝的行李系統。
采用3/16英寸（4.75毫米）厚的陽極氧化鋁制成
。與givi monokey頂箱系統連接（需要givi頂箱安裝套件）
與rotopax燃油系統連接
與柱塞球支架連接。
...有銀色和黑色兩種顏色可供選擇
...高度：2英寸
...寬度：15英寸
...深度：17英寸
...重量：3磅
...本產品可以是只有在拆除了原廠不銹鋼行李架的情況下，才會安裝在R 1200 Gs Adventure上。
[注意]
[商品描述]
The AltRider pillion rack for the BMW R 1200 GS just might be the most versatile on the market， featuring five different mounting configurations， several attachment options for RotopaX fuel packs， interfaces for the Givi Monokey top case system (requires Givi top case mounting kit) and the GSessories Tail Gunner case， and four separate mount points for RAM ball mounts. This allows for easy mounting of an action camera in the perfect location without the need for additional complicated clamps. You can decide to ride with a lot of luggage or with a pillion， and the luggage rack will accommodate your needs at a moment’s notice.
Although available separately， the two racks in the AltRider Luggage Rack System for the BMW R 1200 GS work best together. The well thought out pillion rack is CNC machined from 3／16 inch (4.75 mm) thick anodized aluminum. Varied cutouts make it easy to strap， tie down， or hook bags or other items securely. The finishes are superb on this rack with all chamfered cutouts which results in smooth edges all around. Installation of the pillion rack takes no time at all since it attaches and releases the same way the pillion seat does - with the key - so extra tools are unnecessary.
There is no rack system on the market that provides all these configurations within the same product. Other manufacturers have simply made multiple parts， so the rider has to decide at the time of purchase how， what type， and how much luggage will be carried. With the AltRider solution， the rider can now configure the luggage system to the current need.
GIVI Monokey top cases can be fitted with the GIVI Mounting Kit -- no need for the additional cost of an adapter plate. NOT COMPATIBLE WITH GIVI Trekker 52L Top Case.
・Made of 3／16 inch (4.75 mm) thick anodized aluminum
・Interfaces with Givi Monokey top case system (requires Givi top case mounting kit)
・Interfaces with Rotopax Fuel system
・Interfaces with RAM ball mounts
・Available in silver or black
・Height: 2 inches
・Width: 15 inches
・Depth: 17 inches
・Weight: 3 lbs
・This product can be fitted to the R 1200 GS Adventure only if the OEM stainless steel luggage rack is removed.
Although available separately， the two racks in the AltRider Luggage Rack System for the BMW R 1200 GS work best together. The well thought out pillion rack is CNC machined from 3／16 inch (4.75 mm) thick anodized aluminum. Varied cutouts make it easy to strap， tie down， or hook bags or other items securely. The finishes are superb on this rack with all chamfered cutouts which results in smooth edges all around. Installation of the pillion rack takes no time at all since it attaches and releases the same way the pillion seat does - with the key - so extra tools are unnecessary.
There is no rack system on the market that provides all these configurations within the same product. Other manufacturers have simply made multiple parts， so the rider has to decide at the time of purchase how， what type， and how much luggage will be carried. With the AltRider solution， the rider can now configure the luggage system to the current need.
GIVI Monokey top cases can be fitted with the GIVI Mounting Kit -- no need for the additional cost of an adapter plate. NOT COMPATIBLE WITH GIVI Trekker 52L Top Case.
・Made of 3／16 inch (4.75 mm) thick anodized aluminum
・Interfaces with Givi Monokey top case system (requires Givi top case mounting kit)
・Interfaces with Rotopax Fuel system
・Interfaces with RAM ball mounts
・Available in silver or black
・Height: 2 inches
・Width: 15 inches
・Depth: 17 inches
・Weight: 3 lbs
・This product can be fitted to the R 1200 GS Adventure only if the OEM stainless steel luggage rack is removed.
[注意]
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
問與答（0）
商品評論（0 ）
0/5