適用車型
[商品描述]
在R 1200 GsW上增加了一個散熱器，為BMW備受推崇的冒險自行車帶來了很多興奮。
由1/16英寸(1.6毫米)陽極氧化鋁制成，散熱器保護裝置可防止棍棒和其他危險的東西進入。特別設計的百葉窗可以擋住錯誤的碎片，同時引導氣流通過冷卻系統的心臟。搭配使用時，請勿將其視為 "硬體"，以免造成不必要的傷害。ALTRIDER防護罩是市場上唯一使用堅固的4英寸安裝片安裝的設計，以均勻分布任何沖擊力。只需卸下固定護罩的三個螺栓，插入護罩，然後重新安裝護罩。護罩的完美幾何形狀與護罩的輪廓完全吻合，創造了一個異常堅固而又不失美觀的護罩，無需拆除整流罩。
可選陽極氧化銀或黑色。
保持560磅(250公斤)R 1200 Gs液態冷卻，以免壓壞散熱器。
所有的altrider摩托車配件都是100%在中國設計和制造的。美國
.2片式防護罩，在引導氣流通過散熱器的同時，還能擋住碎片
.15分鍾的安裝時間，使用原廠硬件
.1/16英寸(1)。
.高度(每只)-10英寸(25.4厘米)
.寬度(每只)-6.5英寸(16.5厘米)
.重量(每只)-.25磅(.11公斤)
.可提供陽極氧化銀或黑色
由1/16英寸(1.6毫米)陽極氧化鋁制成，散熱器保護裝置可防止棍棒和其他危險的東西進入。特別設計的百葉窗可以擋住錯誤的碎片，同時引導氣流通過冷卻系統的心臟。搭配使用時，請勿將其視為 "硬體"，以免造成不必要的傷害。ALTRIDER防護罩是市場上唯一使用堅固的4英寸安裝片安裝的設計，以均勻分布任何沖擊力。只需卸下固定護罩的三個螺栓，插入護罩，然後重新安裝護罩。護罩的完美幾何形狀與護罩的輪廓完全吻合，創造了一個異常堅固而又不失美觀的護罩，無需拆除整流罩。
可選陽極氧化銀或黑色。
保持560磅(250公斤)R 1200 Gs液態冷卻，以免壓壞散熱器。
所有的altrider摩托車配件都是100%在中國設計和制造的。美國
.2片式防護罩，在引導氣流通過散熱器的同時，還能擋住碎片
.15分鍾的安裝時間，使用原廠硬件
.1/16英寸(1)。
.高度(每只)-10英寸(25.4厘米)
.寬度(每只)-6.5英寸(16.5厘米)
.重量(每只)-.25磅(.11公斤)
.可提供陽極氧化銀或黑色
[注意]
[商品描述]
The addition of a radiator on the R 1200 GSW has generated a lot of excitement for BMW’s respected adventure bike. Protect the new component with an AltRider Radiator Guard.
Made from 1／16 inch (1.6 mm) anodized aluminum， the radiator guard prevents sticks and other dangers from puncturing the heart of the cooling system. Specially designed louvers deflect errant debris， while simultaneously directing airflow through the radiator to keep the water boxer cool. The radiator guard is spaced a minimum 1／2 inch from the radiator face to further enable airflow.
The AltRider guard is the only design on the market to mount using a robust 4 inch mounting tab to evenly distribute any impact forces. Installation is a breeze - simply remove the three bolts holding the shroud in place， insert the guard， and reinstall the shroud. There are no spacers to deal with or hardware to add， and no need to remove the fairings. The perfect geometry of the guard exactly matches the contours of the shroud creating an exceptionally strong yet simple mount.
Available in anodized silver or black.
Keep the 560 pound (250 Kg) R 1200 GS liquid cooled from crushing the radiator in the event of a crash with AltRider Upper and Lower Crash Bars.
・All AltRider motorcycle accessories are 100% designed and manufactured in the USA
・2 piece guard deflects debris while directing airflow through radiator
・15 minute installation uses OEM hardware
・1／16 inch (1.6 mm) aluminum
・Height (each) - 10 inches (25.4 cm)
・Width (each) - 6.5 inches (16.5 cm)
・Weight (each) - .25 lbs. (.11 kg)
・Available in anodized silver or black
Made from 1／16 inch (1.6 mm) anodized aluminum， the radiator guard prevents sticks and other dangers from puncturing the heart of the cooling system. Specially designed louvers deflect errant debris， while simultaneously directing airflow through the radiator to keep the water boxer cool. The radiator guard is spaced a minimum 1／2 inch from the radiator face to further enable airflow.
The AltRider guard is the only design on the market to mount using a robust 4 inch mounting tab to evenly distribute any impact forces. Installation is a breeze - simply remove the three bolts holding the shroud in place， insert the guard， and reinstall the shroud. There are no spacers to deal with or hardware to add， and no need to remove the fairings. The perfect geometry of the guard exactly matches the contours of the shroud creating an exceptionally strong yet simple mount.
Available in anodized silver or black.
Keep the 560 pound (250 Kg) R 1200 GS liquid cooled from crushing the radiator in the event of a crash with AltRider Upper and Lower Crash Bars.
・All AltRider motorcycle accessories are 100% designed and manufactured in the USA
・2 piece guard deflects debris while directing airflow through radiator
・15 minute installation uses OEM hardware
・1／16 inch (1.6 mm) aluminum
・Height (each) - 10 inches (25.4 cm)
・Width (each) - 6.5 inches (16.5 cm)
・Weight (each) - .25 lbs. (.11 kg)
・Available in anodized silver or black
[注意]
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
問與答（0）
商品評論（0 ）
0/5