快速出貨 在庫推薦
快速出貨
快速出貨
KIJIMA
馬鞍包支架左右組 VULCAN S
快速出貨
DAYTONA
左側馬鞍包支架 REBEL1100 (21-) 等車款
快速出貨
DAYTONA
馬鞍包支架
快速出貨
快速出貨
快速出貨
HONDA
後置物箱安裝基座 PCX150 / 125
快速出貨
KIJIMA
馬鞍包支架 XV950 BOLT (14-)
快速出貨
KIJIMA
側包支架 CT125 (20-)
快速出貨
快速出貨
Cub House by HONDA
頭燈上貨架 CT125
快速出貨
ENDURANCE
側馬鞍包支架組
快速出貨
DAYTONA
側包支架套件
快速出貨
KITACO
K TOUR 馬鞍包支架 DAX125 (22-)
快速出貨
HONDA
座墊包支架 CT125 (23-)
快速出貨
DAYTONA
左側馬鞍箱包支架 CL500 / 250 (23-)
快速出貨
HONDA
馬鞍箱包支架 CL500 / 250 (23-)
快速出貨
ENDURANCE
側包支架 Z650RS (22-)
適用車型
[商品描述]
使用Altrider的水冷式BMW R 1200 Gs後座架，創造你的載重能力和多功能性。altrider目前提供了市場上唯一的後排座架，由於工程設計的原因。
機架由3/16'(4.76 mm)激光切割鋁材制造而成，所有這些都是由新的座椅向前和向後移動所造成的挑戰。鏤空的設計是用數控機床加工而成的，沒有鋒利的邊緣來切割帶子。更多關於altrider行李架的開發過程，請查看博客文章hooked：我們是如何開發的。
如果您同時擁有後排行李架和後排行李架，您還可以選擇購買後排行李架。備用配置，允許同時安裝後排車架、帶扶手的原廠上塑料架和上塑料架。請注意，要使用原廠塑料車架的後排車架，必須使用後排車架套件的硬件。 請注意，要使用帶有原廠塑料車架的後排車架，必須使用後排車架套件的硬件。有了Altrider的液冷R 1200 Gs的行李系統，你就可以最大限度地發揮你的冒險自行車的作用。
與altrider後行李架不兼容，創造超過3平方英尺（.29平方米）的完全平滑的行李表面。與R1200GSW Adventure兼容，後行李架安裝在較低的位置（需要拆除OEM鋼制頂箱架--）。與鋼制托盤架兼容）。)
使用後座鍵式鎖扣安裝，無需任何硬件或工具
.3/16'(4.76 mm)激光切割鋁
.是altrider的一部分。
.長度: 14.4' (36.6 cm)
.寬度: 12.4' (31.5 cm)
.重量: 3 lbs (1.4 kg)
.可選擇陽極氧化處理。銀色或黑色
評論很有說服力：請查看我們的客戶在Advrider上的詳細評論
。
機架由3/16'(4.76 mm)激光切割鋁材制造而成，所有這些都是由新的座椅向前和向後移動所造成的挑戰。鏤空的設計是用數控機床加工而成的，沒有鋒利的邊緣來切割帶子。更多關於altrider行李架的開發過程，請查看博客文章hooked：我們是如何開發的。
如果您同時擁有後排行李架和後排行李架，您還可以選擇購買後排行李架。備用配置，允許同時安裝後排車架、帶扶手的原廠上塑料架和上塑料架。請注意，要使用原廠塑料車架的後排車架，必須使用後排車架套件的硬件。 請注意，要使用帶有原廠塑料車架的後排車架，必須使用後排車架套件的硬件。有了Altrider的液冷R 1200 Gs的行李系統，你就可以最大限度地發揮你的冒險自行車的作用。
與altrider後行李架不兼容，創造超過3平方英尺（.29平方米）的完全平滑的行李表面。與R1200GSW Adventure兼容，後行李架安裝在較低的位置（需要拆除OEM鋼制頂箱架--）。與鋼制托盤架兼容）。)
使用後座鍵式鎖扣安裝，無需任何硬件或工具
.3/16'(4.76 mm)激光切割鋁
.是altrider的一部分。
.長度: 14.4' (36.6 cm)
.寬度: 12.4' (31.5 cm)
.重量: 3 lbs (1.4 kg)
.可選擇陽極氧化處理。銀色或黑色
評論很有說服力：請查看我們的客戶在Advrider上的詳細評論
。
[注意]
[商品描述]
Increase your carrying capacity and versatility with AltRider’s Pillion Rack for the water cooled BMW R 1200 GS. This clever rack mounts using the keyed latch of the pillion seat - no hardware， brackets or tools required. AltRider currently offers the only pillion rack on the market， due to the engineering challenges caused by the new seat moving forward and rearward.
The rack is manufactured from 3／16” (4.76 mm) laser-cut aluminum， and all cutouts are CNC-routered to produce a refined finish with no sharp edges to cut straps. The cutouts are strategically placed to provide a multitude of tie-down points while maintaining the strength of the rack. See more about how AltRider luggage racks are developed on the blog post Hooked: How We Developed Our Luggage Racks. Available in anodized silver or black finish.
If you own both the Pillion Rack and the Rear Rack， you have the option of an alternate configuration which allows simultaneous mounting of the Pillion Rack， factory upper plastic rack with grab handles， and Rear Rack in upper position (bolted to the factory rack). Note that hardware from the Rear Rack kit is necessary to use the Pillion Rack with factory plastic rack.
While each AltRider luggage options are available separately， get the most out of your adventure bike with AltRider’s Luggage System for the liquid cooled R 1200 GS. The pillion rack combines with the AltRider Rear Luggage Rack to create over 3 square feet (.29 square meters) of completely smooth luggage surface.
Not compatible with BMW Vario side cases. Compatible with R1200GSW Adventure with Rear Luggage Rack mounted in lower position (requires removal of OEM steel top box rack -- compatible with steel pannier racks).
・Mounts using pillion seat keyed latch - no hardware or tools required
・3／16” (4.76 mm) laser-cut aluminum
・Part of the AltRider Luggage System for the R 1200 GS WC
・Length: 14.4” (36.6 cm)
・Width: 12.4” (31.5 cm)
・Weight: 3 lbs (1.4 kg)
・Available in anodized silver or black
Reviews speak volumes: check out a detailed review from one of our customers on advrider.
The rack is manufactured from 3／16” (4.76 mm) laser-cut aluminum， and all cutouts are CNC-routered to produce a refined finish with no sharp edges to cut straps. The cutouts are strategically placed to provide a multitude of tie-down points while maintaining the strength of the rack. See more about how AltRider luggage racks are developed on the blog post Hooked: How We Developed Our Luggage Racks. Available in anodized silver or black finish.
If you own both the Pillion Rack and the Rear Rack， you have the option of an alternate configuration which allows simultaneous mounting of the Pillion Rack， factory upper plastic rack with grab handles， and Rear Rack in upper position (bolted to the factory rack). Note that hardware from the Rear Rack kit is necessary to use the Pillion Rack with factory plastic rack.
While each AltRider luggage options are available separately， get the most out of your adventure bike with AltRider’s Luggage System for the liquid cooled R 1200 GS. The pillion rack combines with the AltRider Rear Luggage Rack to create over 3 square feet (.29 square meters) of completely smooth luggage surface.
Not compatible with BMW Vario side cases. Compatible with R1200GSW Adventure with Rear Luggage Rack mounted in lower position (requires removal of OEM steel top box rack -- compatible with steel pannier racks).
・Mounts using pillion seat keyed latch - no hardware or tools required
・3／16” (4.76 mm) laser-cut aluminum
・Part of the AltRider Luggage System for the R 1200 GS WC
・Length: 14.4” (36.6 cm)
・Width: 12.4” (31.5 cm)
・Weight: 3 lbs (1.4 kg)
・Available in anodized silver or black
Reviews speak volumes: check out a detailed review from one of our customers on advrider.
[注意]
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
問與答（0）
商品評論（0 ）
0/5