適用車型
[商品描述]
'你的大寶馬發動機在公路上和公路上都能得到尊重，但你可以通過為它提供反映其尺寸的側立腳來幫助它保持尊嚴。bmw r 1200 gs水冷的altrider側立腳為您的自行車提供了更大的占地面積，所以它可以輕松地保持它的熱沉。
在看到我們之前設計的許多模仿品後，我們的設計也是如此。突出顯示的標志被戰略性地設計為通過去除 "高亮 "標志來降低重量。保持側支架腳的重量向下是至關重要的，因為任何增加的重量，你的側支架可能會導致你的側支架。如果自行車在行駛過程中側支架掉落，可能會打開側支架開關保護裝置，從而切斷發動機。
采用高硬度的1/8英寸不銹鋼制成，此款腳踏采用3D立體花紋設計，呼應了 "高性價比 "的理念。它是市場上最符合人體工程學的設計，讓你的靴子更容易上手。鋁合金腳還可以用螺絲釘夾住側面支架的實際腳，這意味着...。即使在使用了幾個月後，該部件仍將保持緊密。沒有更多的響聲或剝離的緊固件！
了解更多關於我們如何設計這個產品在
我們的altrider車庫博客文章，長長的路要靠邊站腳。
可選擇銀色或黑色
所有altrider摩托車。配件100%在美國設計和制造
由1/8' (3.18 mm)不銹鋼制成
.3D設計使踢腿的部署更加容易。底座帶後備箱
.Torx緊固器確保放大機不會松動
.有銀色和黑色兩種顏色可供選擇
.冒險型號見pdf
在看到我們之前設計的許多模仿品後，我們的設計也是如此。突出顯示的標志被戰略性地設計為通過去除 "高亮 "標志來降低重量。保持側支架腳的重量向下是至關重要的，因為任何增加的重量，你的側支架可能會導致你的側支架。如果自行車在行駛過程中側支架掉落，可能會打開側支架開關保護裝置，從而切斷發動機。
采用高硬度的1/8英寸不銹鋼制成，此款腳踏采用3D立體花紋設計，呼應了 "高性價比 "的理念。它是市場上最符合人體工程學的設計，讓你的靴子更容易上手。鋁合金腳還可以用螺絲釘夾住側面支架的實際腳，這意味着...。即使在使用了幾個月後，該部件仍將保持緊密。沒有更多的響聲或剝離的緊固件！
了解更多關於我們如何設計這個產品在
我們的altrider車庫博客文章，長長的路要靠邊站腳。
可選擇銀色或黑色
所有altrider摩托車。配件100%在美國設計和制造
由1/8' (3.18 mm)不銹鋼制成
.3D設計使踢腿的部署更加容易。底座帶後備箱
.Torx緊固器確保放大機不會松動
.有銀色和黑色兩種顏色可供選擇
.冒險型號見pdf
[注意]
*注：Altrider側立擴大機立板與2014款GS車型不兼容。
[商品描述]
Your big BMW engine commands respect off road and on， but you can help it retain that dignity by providing it with a side stand foot that reflects its size. The AltRider Side Stand Foot for the BMW R 1200 GS Water Cooled provides your bike with a larger footprint， so it can easily keep it from sinking into hot pavement or losing its balance on soft， uneven terrain such as dirt or gravel roads.
After seeing many imitations of our previous designs， AltRider has taken our side stand foot design to the next level. The highlighted logo was strategically designed to keep weight down by removing unnecessary material from the bottom plate. Keeping the weight of the side stand foot down is critical because any added weight to your side stand can lead to the side stand dropping during a ride. If a side stand drops while the bike is in motion， it can deploy the side stand switch guard， cutting the engine without warning and lead to a potential crash.
Made from hefty 1／8 inch stainless steel， this foot features a 3D tread that echoes the aggressive AltRider Oil Cooler Guard design， while providing traction for your boots. It is the most ergonomic design on the market， allowing easy deployment of the side stand while still on the bike. The AltRider foot also clamps down on the actual foot of the side stand with Torx fasteners， which means the piece will remain tight even after months of use. No more rattling or stripped fasteners!
Learn more about how we designed this product in our AltRider Garage blog post， The Long Road to the Side Stand Foot.
Available in silver or black
・All AltRider motorcycle accessories are 100% designed and manufactured in the USA
・Made from 1／8” (3.18 mm) stainless steel
・3D design allows easy deployment of kick stand with boot
・TORX fasteners ensure enlarger won’t vibrate loose
・Available in silver or black
For the adventure model， see PDF
After seeing many imitations of our previous designs， AltRider has taken our side stand foot design to the next level. The highlighted logo was strategically designed to keep weight down by removing unnecessary material from the bottom plate. Keeping the weight of the side stand foot down is critical because any added weight to your side stand can lead to the side stand dropping during a ride. If a side stand drops while the bike is in motion， it can deploy the side stand switch guard， cutting the engine without warning and lead to a potential crash.
Made from hefty 1／8 inch stainless steel， this foot features a 3D tread that echoes the aggressive AltRider Oil Cooler Guard design， while providing traction for your boots. It is the most ergonomic design on the market， allowing easy deployment of the side stand while still on the bike. The AltRider foot also clamps down on the actual foot of the side stand with Torx fasteners， which means the piece will remain tight even after months of use. No more rattling or stripped fasteners!
Learn more about how we designed this product in our AltRider Garage blog post， The Long Road to the Side Stand Foot.
Available in silver or black
・All AltRider motorcycle accessories are 100% designed and manufactured in the USA
・Made from 1／8” (3.18 mm) stainless steel
・3D design allows easy deployment of kick stand with boot
・TORX fasteners ensure enlarger won’t vibrate loose
・Available in silver or black
For the adventure model， see PDF
[注意]
※ Note： AltRider Side Stand Enlarger Riser Plate not compatible with 2014 GS models.
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
問與答（0）
商品評論（0 ）
0/5