[商品描述]
像Multistrada這樣的機器需要最好的保護,這就是為什么我們創造了杜卡迪Multistrada 1200的altrider防撞桿。
這些防撞桿由1英寸的不銹鋼制成,這些防撞桿采用精密制造的支架,直接集成到摩托車的。
由1英寸的不銹鋼制成,這些防撞桿采用精密制造的支架,直接集成到摩托車的內部。它們由一根橫桿自我加固,並保護着整流罩、散熱器和水泵。防撞桿采用噴丸緞面處理,因此即使在自行車受到撞擊後,不銹鋼防撞桿也不會有生銹的跡象。
無縫連接框式滑塊的安裝完善了一個美觀而堅固的解決方案。通過鋁坯偏移無縫連接到Altrider防撞桿支架上,設計為有效地將沖擊載荷轉移到防撞桿上。因為直接安裝在車架上,所以車架避免了車架滑塊直接與車架本身用螺栓固定的情況下,在碰撞中可能發生的損壞。br />滑塊利用了具有良好潤滑性和耐磨性的塑料,因此,鋁框滑塊比那些用塑料制成的滑塊能有更長的使用壽命。此外,抗沖擊能力強,使滑塊在碰撞中不易折斷或開裂。使用高強度鉻鉬鋼棒代替常用的全螺紋或不銹鋼(閱讀更多的原因)。
防撞條有銀色和黑色兩種顏色可供選擇。
2015年和更新的車型可提供額外的車燈安裝套件,以安裝原廠配件。從下拉菜單中選擇 "帶車燈安裝套件",以包括該套件。
請注意,防撞條會影響原輔助燈的安裝點,需要安裝套件才能繼續使用原輔助燈。
1英寸不銹鋼結構
手工Tig焊接
包括框架滑塊和鉻鉬鋼螺栓
和高度:16。
.寬度:6英寸(15.2厘米)
.深度:10英寸(25.4厘米)
.重量:10磅(4.5公斤)
套裝部件:Altrider。
[注意]
*注:該套件不包括運行防撞桿所需的短發動機螺栓,不含車架滑塊。僅僅是防撞桿,你應該單獨訂購防撞桿和車架滑塊。
[商品描述]
A machine like the Multistrada requires the best protection available, which is why we created the AltRider Crash Bars for the Ducati Multistrada 1200.
Made of 1 inch stainless steel, these crash bars are built with precision-manufactured mounts that integrate directly into the motorcycle’s frame through the motor mount. They are self-reinforced by a cross bar, and wrap protectively around the fairings, radiator and water pump. The AltRider Crash Bars are made with a shot peen satin finish, so even after the bike takes a spill the stainless bars will never show signs of rust.
Seamless installation of frame sliders rounds out an attractive and strong solution. Made from abrasion and impact resistant plastic, these sliders integrate seamlessly into the AltRider Crash Bar mount by attaching via billet aluminum offset, designed to effectively transfer the impact load to the crash bars. Because of the direct mount to the bars, the frame avoids damage that can occur in a crash when frame sliders are bolted directly to the frame itself.
The sliders utilize plastic with good lubrication and wear properties, so AltRider frame sliders can survive a longer slide than those made with other common materials. Additionally, the ability to resist impact is high, making the slider less likely to snap off or crack in a crash. We also chose to use high strength chromoly steel rod instead of commonly used all-thread or stainless steel (read more about why).
Crash bars are available in silver or black.
An additional light mount kit is available for the 2015 and newer models to mount the OEM lights to the crash bars. Select ”with light mount kit” from the drop-down menu to include this kit. Light mount kit not available for 2010-2014 model crash bars.
Please note - crash bars interfere with original mounting point of OEM auxiliary lights, mounting kit is required to continue use of OEM lights.
・1 inch stainless steel construction
・Hand TIG welding
・Includes frame sliders and chromoly steel bolt
・Height: 16 inches (40.6 cm)
・Width: 6 inches (15.2 cm)
・Depth: 10 inches (25.4 cm)
・Weight: 10 lbs (4.5 kg)
Kit Parts: AltRider Crash Bar Frame Sliders for the Ducati Multistrada (1)
[注意]
※ Note: This kit does not include the short engine bolt required to run the crash bars without the frame sliders. If you would like the option to run the crash bars alone, you should order the crash bars and frame sliders individually.
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。