適用車型
[商品描述]
一般人需要0.5到1整秒的時間對危險做出反應.以60英里/小時的速度行駛，騎手將行駛25到50英尺才能夠做出適當的反應。以60英里/小時的速度行駛，騎手將行駛25到50英尺才能夠做出正確的反應。如果您的腳還沒有正確踩在後剎車踏板上，您的反應時間和距離可能會增加一倍。這就是為什么你在照片中看到所有摩托車手的前剎車桿上都有1個或2個手指。ALTRIDER雙控制動系統有兩個部分，可以提高制動系統的性能。
在坐姿時，騎手彎曲的膝蓋會自然地將角度放得更大。腳指與小腿成90度，而站立的姿勢會使腿部更直，並將腳的角度提升到更水平的位置使用oem制動踏板，無論坐着還是站着都沒有辦法保持正確的制動控制位置。和立管相結合，現在有兩個級別的後剎車，讓你的腳處於最佳位置，無論騎行位置如何。每個騎手都是不同的，根據你的騎行風格，有兩種高度的立管可供選擇。
增大
不斷變化的越野騎行地形意味着您的整個身體在不斷地移動和調整。坯料鋁制擴大板為你的腳提供了更大的工作表面積，讓你對後剎車有更多的控制。新的自行車模型與每個自行車模型都有精確的匹配，確保了長期的穩定性。
不銹鋼底板和五金件，可承受越野騎行的磨損
兩種產品均可單獨使用或作為套件使用。
增加器和立管可在黑色或銀色
.專利申請中
取代KTM, 哈斯克瓦那, 和哈薩博格原廠零件號: 60013051000,54813951000,
81213951000, 54813051100 and 54813051000.
適合:
.ktm 1190 adventure/r
.ktm 1290 super adventure
。
.ktm 990 and 950 adventure
.ktm 690 enduro
.ktm 125-540cc bikes
.husqvarna 125-501 cc bikes
.for full fit list see pdf.
在坐姿時，騎手彎曲的膝蓋會自然地將角度放得更大。腳指與小腿成90度，而站立的姿勢會使腿部更直，並將腳的角度提升到更水平的位置使用oem制動踏板，無論坐着還是站着都沒有辦法保持正確的制動控制位置。和立管相結合，現在有兩個級別的後剎車，讓你的腳處於最佳位置，無論騎行位置如何。每個騎手都是不同的，根據你的騎行風格，有兩種高度的立管可供選擇。
增大
不斷變化的越野騎行地形意味着您的整個身體在不斷地移動和調整。坯料鋁制擴大板為你的腳提供了更大的工作表面積，讓你對後剎車有更多的控制。新的自行車模型與每個自行車模型都有精確的匹配，確保了長期的穩定性。
不銹鋼底板和五金件，可承受越野騎行的磨損
兩種產品均可單獨使用或作為套件使用。
增加器和立管可在黑色或銀色
.專利申請中
取代KTM, 哈斯克瓦那, 和哈薩博格原廠零件號: 60013051000,54813951000,
81213951000, 54813051100 and 54813051000.
適合:
.ktm 1190 adventure/r
.ktm 1290 super adventure
。
.ktm 990 and 950 adventure
.ktm 690 enduro
.ktm 125-540cc bikes
.husqvarna 125-501 cc bikes
.for full fit list see pdf.
[注意]
[商品描述]
The average person takes 0.5 to 1 full second to react to hazards. Traveling at 60 MPH， a rider will travel 25 to 50 feet before being able to properly react. Most OEM brake pedals have a single-positioned small footprint， yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If your foot is not already situated correctly on the rear brake pedal， you are now potentially doubling reaction time and distance to make what could be a critical stop. This is why you see all motorcycle racers with 1 or 2 fingers on the front brake lever in photographs. AltRider has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the AltRider DualControl Brake System that enhance control and reaction time; a riser and an enlarger plate.
Riser
When in a seated position， a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg， while a standing position creates a straighter leg and raises the angle of your foot to a more horizontal position. Using the OEM brake pedal， there is no way to keep the correct brake control position when both sitting and standing. With the AltRider enlarger and riser combined， there are now two levels in which to engage the rear brake， putting your foot in optimal position regardless of riding position. As every rider is different， there are two riser heights available depending on your riding style. For those needing additional customization， risers can also be swapped out.
Enlarger
The ever-changing terrain of off-road riding means your entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives your foot a greater surface area to work with， affording you more control of the rear brake. The enlarger plate is precision fit to each bike model ensuring long-term stability. Optional and replaceable grip pins are provided for further customization.
Both products are available separately or as a kit.
・Stainless steel bottom plate and hardware to endure the abrasions of off-road riding
・100% designed and manufactured in the USA
・25.4 mm riser height available
・Pins provided with enlarger for enhanced grip， extras included
・Enlarger and Riser available in black or silver
・Patent Pending
Replaces KTM， Husqvarna， and Husaberg OEM part numbers: 60013051000， 54813951000，
81213951000， 54813051100 and 54813051000.
Fits:
・KTM 1190 Adventure ／ R
・KTM 1290 Super Adventure
・KTM 990 and 950 Adventure
・KTM 690 Enduro
・KTM 125-540cc bikes
・Husqvarna 125-501 cc bikes
・For full fit list see PDF
Riser
When in a seated position， a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg， while a standing position creates a straighter leg and raises the angle of your foot to a more horizontal position. Using the OEM brake pedal， there is no way to keep the correct brake control position when both sitting and standing. With the AltRider enlarger and riser combined， there are now two levels in which to engage the rear brake， putting your foot in optimal position regardless of riding position. As every rider is different， there are two riser heights available depending on your riding style. For those needing additional customization， risers can also be swapped out.
Enlarger
The ever-changing terrain of off-road riding means your entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives your foot a greater surface area to work with， affording you more control of the rear brake. The enlarger plate is precision fit to each bike model ensuring long-term stability. Optional and replaceable grip pins are provided for further customization.
Both products are available separately or as a kit.
・Stainless steel bottom plate and hardware to endure the abrasions of off-road riding
・100% designed and manufactured in the USA
・25.4 mm riser height available
・Pins provided with enlarger for enhanced grip， extras included
・Enlarger and Riser available in black or silver
・Patent Pending
Replaces KTM， Husqvarna， and Husaberg OEM part numbers: 60013051000， 54813951000，
81213951000， 54813051100 and 54813051000.
Fits:
・KTM 1190 Adventure ／ R
・KTM 1290 Super Adventure
・KTM 990 and 950 Adventure
・KTM 690 Enduro
・KTM 125-540cc bikes
・Husqvarna 125-501 cc bikes
・For full fit list see PDF
[注意]
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
問與答（0）
商品評論（0 ）
0/5