適用車型
[商品描述]
保護重要的發動機殼體和油底殼而不放棄。鈴木V-Strom dl650的Altrider防滑板，采用抗沖擊的3.2mm(1/8')陽極氧化銀色或黑色鋁材制成。此防滑板僅與altrider防撞桿配合使用，可為越野車提供理想的保護。
在不影響離地間隙的情況下，保護機油冷卻器，同時仍然允許最佳的空氣流動。防滑板與V-strom完美匹配
需要Altrider防撞桿來安裝
.1/8'陽極氧化鋁。結構
.可提供銀色或黑色
.機油濾清器可以在安裝好滑板後進入
.已知與Givi和OEM一起工作。中央支架
.不兼容LEO VINCE排氣管
.保護油冷卻器，不限制空氣流動
.完整的排氣管頭。
.隱藏式扣件
.高度：10' (25.4 cm)
.寬度：13' (30.5 cm)
.深度：20' (50.8 cm)
.重量：5.85磅(2.7公斤)
[注意]
*注：如果您的V-strom沒有配備中置支架，您可能需要在安裝過程中多一雙手來幫助您將自行車直立起來。
[商品描述]
Temporarily out of production. Possible 3-6 month backlog on this skid plate.
Protect the vital engine cases and oil sump without giving up ground clear with the AltRider Skid Plate for the Suzuki V-Strom DL650. Constructed of impact resistant 3.2 mm (1／8”) anodized silver or black aluminum， this skid plate works only with the AltRider Crash Bars to provide ideal protection for off road conditions. Your exhaust header pipe is also fully protected without sacrificing ground clearance. The oil cooler is well protected while still allowing optimal air flow.
Included with the skid plate is a redesigned rear bracket that allows for easier installation and more overall strength. The skid plate matches up perfectly to the V-Strom crash bars using hidden fasteners for a clean， finished look.
・Requires AltRider Crash Bars for installation
・1／8” anodized aluminum construction
・Available in Silver or Black
・The oil filter is accessible with the skid installed
・Known to work with the Givi and OEM center stands
・Is NOT compatible with Leo Vince Exhaust
・Protects oil cooler without restricting air flow
・Full exhaust header protection
・Hidden fasteners
・Height: 10” (25.4 cm)
・Width: 13” (30.5 cm)
・Depth: 20” (50.8 cm)
・Weight: 5.85lbs.(2.7 kg)
Protect the vital engine cases and oil sump without giving up ground clear with the AltRider Skid Plate for the Suzuki V-Strom DL650. Constructed of impact resistant 3.2 mm (1／8”) anodized silver or black aluminum， this skid plate works only with the AltRider Crash Bars to provide ideal protection for off road conditions. Your exhaust header pipe is also fully protected without sacrificing ground clearance. The oil cooler is well protected while still allowing optimal air flow.
Included with the skid plate is a redesigned rear bracket that allows for easier installation and more overall strength. The skid plate matches up perfectly to the V-Strom crash bars using hidden fasteners for a clean， finished look.
・Requires AltRider Crash Bars for installation
・1／8” anodized aluminum construction
・Available in Silver or Black
・The oil filter is accessible with the skid installed
・Known to work with the Givi and OEM center stands
・Is NOT compatible with Leo Vince Exhaust
・Protects oil cooler without restricting air flow
・Full exhaust header protection
・Hidden fasteners
・Height: 10” (25.4 cm)
・Width: 13” (30.5 cm)
・Depth: 20” (50.8 cm)
・Weight: 5.85lbs.(2.7 kg)
[注意]
※ Note： You may need an extra set of hands during installation to help you hold the bike upright if your V-Strom isn’t equipped with a center stand.
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
問與答（0）
商品評論（0 ）
0/5