適用車型
[商品描述]
'雖然triumph tiger 800在沒有騎手的情況下重量僅為475磅，但它在越野中仍然需要很大的停止力。
此件可完全保護後制動主缸，防止被踢起的痕跡。鋁制防護罩有3個安裝位置，采用齊平安裝的硬件--防止在您的產品中出現卡住的情況。護罩的額外好處是覆蓋了熱的排氣管，消除了一個已知的問題，即可能損壞昂貴的騎行裝備。緊湊的外形使腳部空間比原廠護板大為改善，騎行位置也更窄--這在騎大車時是非常寶貴的改進。護板由1/8'（3.2毫米）鋁材陽極氧化而成，銀色或黑色，與左腳跟護板完美搭配。
Altrider摩托車配件是100%在美國設計和制造的
。 1/8'(3.2 mm)它的安裝很簡單，只需使用提供的嵌入式安裝硬件
.提供比原設計更好的腳部空間
.提供比原設計更好的腳部空間。
.蓋住熱排氣管，以節省昂貴的騎行裝備
.有陽極氧化銀或黑色表面處理
.兼容所有的老虎800型號。
此件可完全保護後制動主缸，防止被踢起的痕跡。鋁制防護罩有3個安裝位置，采用齊平安裝的硬件--防止在您的產品中出現卡住的情況。護罩的額外好處是覆蓋了熱的排氣管，消除了一個已知的問題，即可能損壞昂貴的騎行裝備。緊湊的外形使腳部空間比原廠護板大為改善，騎行位置也更窄--這在騎大車時是非常寶貴的改進。護板由1/8'（3.2毫米）鋁材陽極氧化而成，銀色或黑色，與左腳跟護板完美搭配。
Altrider摩托車配件是100%在美國設計和制造的
。 1/8'(3.2 mm)它的安裝很簡單，只需使用提供的嵌入式安裝硬件
.提供比原設計更好的腳部空間
.提供比原設計更好的腳部空間。
.蓋住熱排氣管，以節省昂貴的騎行裝備
.有陽極氧化銀或黑色表面處理
.兼容所有的老虎800型號。
[注意]
[商品描述]
While the Triumph Tiger 800 weighs in at a slim 475 pounds without a rider， it still requires a lot of stopping power on the trail. Protect your rear braking system with a rear brake master cylinder guard from AltRider.
This piece fully protects the rear brake master cylinder from kicked up trail debris and damage in a dangerous tip-over. The aluminum guard utilizes 3 mounting locations with flush mounted hardware -- preventing snags in your riding pants. The guard has the added benefit of covering the hot exhaust pipe， eliminating a known issue that can damage expensive riding gear. A more compact profile yields much improved foot room over the stock guard and a narrower riding position -- an invaluable improvement when riding a large bike off-road. The guard is constructed from 1／8” (3.2 mm) aluminum anodized in silver or black， and is a perfect match for the left heel guard. The guard is compatible with all Tiger 800 models.
・AltRider motorcycle accessories are 100% designed and manufactured in the USA
・1／8” (3.2 mm) aluminum is strong yet lightweight
・Simple installation with provided flush mount hardware
・Offers improved foot room over stock design
・Covers hot exhaust pipe to save expensive riding gear
・Available in anodized silver or black finish
・Compatible with all Tiger 800 models
This piece fully protects the rear brake master cylinder from kicked up trail debris and damage in a dangerous tip-over. The aluminum guard utilizes 3 mounting locations with flush mounted hardware -- preventing snags in your riding pants. The guard has the added benefit of covering the hot exhaust pipe， eliminating a known issue that can damage expensive riding gear. A more compact profile yields much improved foot room over the stock guard and a narrower riding position -- an invaluable improvement when riding a large bike off-road. The guard is constructed from 1／8” (3.2 mm) aluminum anodized in silver or black， and is a perfect match for the left heel guard. The guard is compatible with all Tiger 800 models.
・AltRider motorcycle accessories are 100% designed and manufactured in the USA
・1／8” (3.2 mm) aluminum is strong yet lightweight
・Simple installation with provided flush mount hardware
・Offers improved foot room over stock design
・Covers hot exhaust pipe to save expensive riding gear
・Available in anodized silver or black finish
・Compatible with all Tiger 800 models
[注意]
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
問與答（0）
商品評論（0 ）
0/5