LED 方向燈一體型整合式尾燈

【Features】
・Smoked or clear lens
・Built in turn signals
・4 programmable functions (optional)
・Plug and play wiring
・20 minute installation
・80 superbright LEDs
・Includes FREE exhaust lowering link kit for better tail light visibility

This integrated tail light system gets rid of the fender， stock light and signals assembly.
It is a direct fit within the tail fairing for quick and easy installation.

Each integrated tail light includes a FREE Adjustable Exhaust Lowering Link Kit.
Please be sure to select the correct Lowering Link Kit that matches your exhaust in the application chart below.

This TST Industries taillight system does away with the ugly stock light and signals assembly and is a direct fit within the tail so the installation is a snap (requires trimming off a little of that black plastic closeout under the tail).
The new programmable version features the regular brake and signal functions of our original light and adds the option for having a scanning signal and strobe brake.
The selector switches are built into the housing of the taillight in a location that remains accessible after installation.

This is our own design， a product of American engineering， and is sold only through our stores and a few authorized dealers.
Super Street Bike magazine featured this product in their "Mod of the Month" article in April 2012 (see article in our photos).


【Free Exhaust Lowering Link Kit Application Chart】
Don’t know which kit you need？ Use the chart below to find out！

Exhaust：Kit
Yoshimura RS-5：3 Link
Honda Stock：3 Link
Toce：2 Link
Two Brothers：2 Link
Jardine：2 Link
Akrapovic：3 Link
Leo Vince：3 Link
HyperFlo：2 Link
G and G：2 Link
MIVV X-Cone：2 Link
KR Tuned：2 Link

Don’t see your exhaust on this list？
If your exhaust has a midpipe mount， then you will need a 3 link kit.
Otherwise， a 2 link kit is all you need.

※ This kit does NOT include an exhaust mount. Exhausts mounts are included with your exhaust purchase and must be purchased from the exhaust manufacturer.
※ Please take note of the updated sequential turn signal functionality for the programmable version of this tail light. Any signaling functionality you see in videos that is different from the current design is not available for purchase.
※ Only include Load Balancing Resistors in your order if you are not purchasing an LED Flasher Relay with your new Integrated Tail Light or you have not previously installed an LED Flasher Relay on your CBR600RR.
※ NON U.S. BUYERS： If you are purchasing an LED flasher relay， please verify the pin configuration before purchasing. North American models models require a two pin flasher relay， but some international models require a four pin flasher relay. It is your responsibility to verify fitment of these items before making your purchase.
※ Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms ＆ Conditions for more information.
※ 取り扱い説明書が付属する場合は英語となります。
※ 画像には他のタイプが含まれている場合があります。
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。