HALO-1 LED方向燈

重量：0.33 lbs
【ボックス内容】
・(2) HALO-1シグナル(片面に1つずつ)-クリア-多少キズあり
・取付金具と取り付け手順
【特長】
・レンズの不具合のみによるディスカウント
・2013+のHONDA CBR600RRに適合するよう特別に設計されています。
・ディスカウントの販売状況は異なります。
・ホワイトLED Halo走行灯
・すぐにご使用いただける配線付きで、簡単に取り付けられます。
・ブライトアンバーLEDウインカー

【TST LED HALO-1 FLUSHMOUNT TURN SIGNALS FOR HONDA CBR600RR 2013-2019 - BLEMISHED】
Ditch the pumpkin style signals for a sleek and modern look while keeping some cash in your wallet.
Take advantage of our TST Garage Sale pricing and snag these blemished HALO-1 Flushmount Turn Signals at a huge discount

We are not able to identify exactly which blemishes will appear on the flushmount turn signals you receive.
Please be aware that cosmetic issues may present as，but are not limited to，bubbles in the plastic molding or small scratches.

【Description】
Not every turn signal passes our rigorous quality control tests，and when one fails due to small lens defects but is still fully functional，we slash the price and toss it into the Garage Sale.
This is your chance to get our exclusive TST LED HALO-1 Flushmount Turn Signals at a fraction of the price.
If you don’t mind a few small blemishes，this is the best way to keep some cash in your wallet while upgrading your Honda CBR600RR！

【FAQs】
Q： Do these signals require any wiring or splicing？
A： No - these signals are completely plug and play.

Q： The signals have a 3 pin connector but my signals only have 2.
How do I install？
A： Some bikes outside of North America will only have 2 pins.
For bikes with a two pin signal plug you would take the pins out of the three conductor plug on the halo-1 signals.
The wires in our plug have crimped on metal connectors.
You will insert the halo-1 black wire crimp into your plug position that has the green wire.
Then the halo-1 red wire crimp will go into the remaining slot on your bike’s plug.
Use electrical tape around the plug with the pins in it and make a nice tight electrical tape junction.
You will be left with the green wire from the halo-1 signals.
If you leave it disconnected you will not have the running light.
At this point you can run a wire from the positive lead on your low beam headlight to each of the green wires on the halo-1’s.
This will give you running lights when the bike is on，and they will shut off with the bike.
You can also opt to run a wire to the positive terminal on the battery and use a fuse and a switch on that connection.
The fuse should be immediately next to the battery，and the switch should be accessible somewhere for you so you can switch the halo-1 running light on and off at your will.

Q： Do these signals have running lights？
A： Yes！ In a variety of color choices.

Q： Do I need a flasher relay？
A： Installing aftermarket LED lights may cause your signals to flash faster than the OEM speed.
Purchasing one of our LED flasher relays will correct this problem.

※ 取り扱い説明書が付属する場合は英語となります。
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。