[要點]
寬:900mm
高:120mm
深:210mm
夾持寬度:135mm
材質:鋼
表面處理:鍍鉻
把手夾持:1in.25.4mm)
手把寬度:901mm-1000mm
手把高度:101mm-200mm
3個孔,每個孔之間有1×槽`1×槽的區域。手柄
與tuv測試報告19/3。
[商品描述]
車把直徑32mm.在夾子區域1in.(25.4mm)
對於未列入使用清單的車輛`可提供以下建議。
如果專用車把安裝在未列入此處的車輛上,則應由技術測試中心的官方認可的專家進行栽培評估。如果專用車把安裝在未列入此處`的車輛上,則應由機動車交通技術檢測中心正式認可的專家進行培育評估。
[注意]
產品的規格可能會被制造商改變。請注意,我們沒有任何這方面的信息。
[要點]
Wide:900mm
High:120mm
Depth:210mm
Clamping wide:135mm
Material:Steel
Finish:Chrome
Handlebar clamping:1in. (25.4mm)
Handlebar width:901mm - 1000mm
Handlebar height:101mm - 200mm
3 holes each with 1×slot between the risers、1×slot in the area of the handles
With TUV Test Report 19/3
[商品描述]
Handlebar diameter 32mm. In the area of the clamps 1in. (25.4mm)
For vehicles which are not listed in the usage list、 the following advice is available:
If the special handlebar is mounted on a vehicle which is not listed here、 a cultivation assessment shall be carried out by an officially recognised expert of a technical Test centre for motor vehicle traffic.
[注意]
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。