快速出貨 在庫推薦
![【LA CHOPPERS】ST 00-17 車身降低套件 [1304-0465]](https://webike-cdn-net.azureedge.net/catalogue/images/35531/13040465_s.jpg)
廠商在庫
LA CHOPPERS
ST 00-17 車身降低套件 [1304-0465]
適用車型
[要點]
該6件套套件有以下兩種款式：
純鋁套件（2個前叉蓋、2個上叉蓋和2個下叉蓋）
-帶波紋管套件（2個前叉蓋、2個上叉蓋和2個49毫米波紋管）
純鋁套件（2個前叉蓋、2個上叉蓋和2個下叉蓋）
-帶波紋管套件（2個前叉蓋、2個上叉蓋和2個49毫米波紋管）
[商品描述]
完整的6件套黑色前叉蓋套件，下蓋為鋁制或帶波紋管，適用於2013年至2017年的HARLEY-DAVIDIDSON® BREAKUT車型。2013年至2017年。
有了cult-werk的這個套件，您可以在三叉管夾的上方、中間和下方覆蓋前叉管。
因此，前叉管被覆蓋，整個前叉顯得粗壯且完全黑色！
該前叉蓋套件可與原裝前擋泥板或定制擋泥板配合使用。
單個蓋板使用隱藏式固定螺釘連接，因此可在前叉管上居中。
這樣可以確保蓋子被牢牢固定。
為確保蓋板與三叉樹之間的間隙完全平行，蓋板具有與三叉樹相同的斜面。
我們的蓋板由優質鋁制成，在最先進的五軸加工中心上銑削，然後進行黑色亮光粉末噴塗。
這絕對保證了最高的質量！
裝配非常簡單，只需將上下蓋推到前叉管上並擰緊即可。
在下蓋內側有一個開孔，以便在擋泥板上自由移動，因此幾乎不可見。
有了cult-werk的這個套件，您可以在三叉管夾的上方、中間和下方覆蓋前叉管。
因此，前叉管被覆蓋，整個前叉顯得粗壯且完全黑色！
該前叉蓋套件可與原裝前擋泥板或定制擋泥板配合使用。
單個蓋板使用隱藏式固定螺釘連接，因此可在前叉管上居中。
這樣可以確保蓋子被牢牢固定。
為確保蓋板與三叉樹之間的間隙完全平行，蓋板具有與三叉樹相同的斜面。
我們的蓋板由優質鋁制成，在最先進的五軸加工中心上銑削，然後進行黑色亮光粉末噴塗。
這絕對保證了最高的質量！
裝配非常簡單，只需將上下蓋推到前叉管上並擰緊即可。
在下蓋內側有一個開孔，以便在擋泥板上自由移動，因此幾乎不可見。
[注意]
說明書，如果包括的話，將是英文的。
請注意，由於產品的進口性質，交貨時間可能會推遲。請注意，交貨時間可能會推遲。
請注意，由於制造商的原因，產品規格可能會有變化。請理解。
[要點]
The following two variants are available for this 6-piece kit：
- Kit made of pure aluminum (2x fork caps，2x upper fork covers＆2x lower fork covers)
- Kit with bellows (2x fork caps，2x upper fork covers＆2x 49mm bellows)
- Kit made of pure aluminum (2x fork caps，2x upper fork covers＆2x lower fork covers)
- Kit with bellows (2x fork caps，2x upper fork covers＆2x 49mm bellows)
[商品描述]
Complete 6-piece fork cover kit in black with the lower covers made of aluminum or with bellows suitable for Harley-Davidson®Breakout models from 2013 to 2017.
With this kit from Cult-Werk you can cover the fork tubes above，between and below the Triple clamps.
So the fork tubes are covered and the entire fork appears beefy and completely black！
This fork cover kit can be used with the original front fender or custom fenders.
The individual covers are attached using concealed set screws and thus center themselves on the fork tubes.
This ensures that the cover is held securely.
To ensure that the gaps between the covers and the triple trees are exactly parallel，the covers have the same bevels as the triple trees.
Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated in black gloss.
This guarantees absolutely the highest quality！
The assembly is very easy，the upper and the lower cover are only pushed over the fork tube and screwed tight.
On the inside of the lower cover there is a cutout for freedom of movement on the fender and is therefore hardly visible.
With this kit from Cult-Werk you can cover the fork tubes above，between and below the Triple clamps.
So the fork tubes are covered and the entire fork appears beefy and completely black！
This fork cover kit can be used with the original front fender or custom fenders.
The individual covers are attached using concealed set screws and thus center themselves on the fork tubes.
This ensures that the cover is held securely.
To ensure that the gaps between the covers and the triple trees are exactly parallel，the covers have the same bevels as the triple trees.
Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated in black gloss.
This guarantees absolutely the highest quality！
The assembly is very easy，the upper and the lower cover are only pushed over the fork tube and screwed tight.
On the inside of the lower cover there is a cutout for freedom of movement on the fender and is therefore hardly visible.
[注意]
※ 取り扱い説明書が付属する場合は、英語となります。
※ 輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※ メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
問與答（0）
商品評論（0 ）
0/5