PAGE TOP

可編程供油電腦

定價:NT$ 11,257

會員價: NT$ 8,078 28%OFF

迎接摩托新生活,4/5 - 5/2 免運&分期活動
滿 5,000 即可享免運費優惠
滿 6,000 即可享3期0利率
滿 12,000 即可享6期0利率
滿 24,000 即可享12期0利率

回饋點數: 81 = NT$ 81 購物金
(可於下次購物折抵)

NT$ 8,078

81

出貨日期:請先選擇商品選擇支

您可以選擇收件地區,以確認收件日期

Loading...
數量:

適用車型

【要點】

Compatibility List:APRILIA ATLANTIC 500
APRILIA ATLANTIC 500 SPRINT
APRILIA MXV 450 2008-2011
APRILIA SRV 850
PIAGGIO BEVERLY 400
PIAGGIO BEVERLY 500
PIAGGIO X EVO 400
PIAGGIO X8 400
PIAGGIO X9 500
PIAGGIO X9 500 EVOLUTION

【商品描述】

PROGRAMMABLE CONTROL UNIT JETPRIMEProgrammable through software in a simple and fast way!
Through the appropriate wiring the JETPRIME is installed downstream of the standard control unit and before the throttle body.
In this way the signals sent by the standard control unit they can be modified according to your needs.
The JETPRIME makes it possible to change the fuel ratio going to change the time interval in which the injectors remain open during the aspiration phase.
Often standard motorcycles are limited due to compliance with anti-pollution regulations; performance can therefore be greatly improved and you can do it with this unit!
The JETPRIME control unit becomes essential if combined with a exhaust and a racing filter, as it requires an ad hoc carburetion.
The control unit can be programmed via PC thanks to the USB connection in a simple and intuitive way: just create a 2D carburetion chart.
With the supplied software, you can create your map by acting only on the arrow keys on the keyboard!
The control unit is connected to the injectors, to the IAT sensor and to the 12v derived from the key.

The connection to the IAT sensor allows the advance value to be changed without risking damage to the engine!NB: The picture is only indicativeFOR MORE INFORMATION PLEASE CONTACT US

【注意】

※ 此商品為歐洲供應商直接採購、進口。因此若訂單成立,本站恕不接受取消該訂購。

※ 若您於商品訂購前,有任何問題;舉凡商品內容、規格、交期等,請透過商品諮詢進行確認。

【訂購前注意】 訂購前請詳加確認欲購買的顏色、尺寸等等資訊。 商品多為下訂後回覆交期,所以可能有商品停產,或需長時間等待商品出貨之狀況。 訂單若因廠商缺貨與暫時無法交貨等因素,則不會成立;訂單沒有成立則不會收取任何費用。 商品自訂購至出貨須經過多道運送流程,因此有可能產生包裝在運送過程中變形、破損,但商品本體完好、可正常使用之情況。 商品可能發生製造商變更規格、外觀設計,導致包裝或本體造型與商品頁面圖片不同之情況。 若因製造商變更產品設計、規格,導致商品無法發揮訂購時預期之功能,還請您與本站客服諮詢後續處理。 【退貨注意】 若您需要商品退貨的服務,還請您至退貨區塊進行申請;並請您保持商品外觀、用原包裝外箱封裝完好。 在收到您的退貨申請時,我們會盡快派物流業者前去收貨。 【正品保證】 正品保證之商品,若有被查獲疑似為仿冒品,並經過相關訴訟,最後交由法院判決如實者,將會對購買此商品的顧客進行當初購買價格的10倍賠償。

商品評論(0 )