RACING 分離式把手

Compatibility List：APRILIA RS 660 2021

MELOTTI RACING PAIR OF HANDLEBARS
Compatible with : APRILIA RS 660 2021
Developed to match our upper triple clamp and built with the proven technology of our GP model.
Technical description:
-As in use in modern GP and SBK, an Allen key binds the handlebar and steering plate allowing a continuous rotation of 14 ° of the handlebar itself, from the original opening to the racing one.
This solution gives a further advantage in terms of safety for the driver and facilitates the set-up operations in the pits both in the case of
disassembly of the forks (the half-handlebars remain attached to the upper plate) and for adjusting the half-handlebar opening.

-We have adopted a front truncated-cone type cuff-socket coupling system of GP derivation to obtain high rigidity and minimum external dimensions.

-This choice offers as a further advantage the possibility of exploiting the entire length of the socket for mounting the controls

- Predetermined collapse section to avoid overloading the fork sleeve, irreparably damaging the internal hydraulics in case of failure of the socket (cause of a fall).

-The half-handlebar is also equipped with an anti-rotation and anti-slip system. This solution guarantees maximum safety and allows the quick and precise positioning of levers and push-button panels for teams that use the preassembly of commands on the posts, should it be necessary to remove the post from the cuff following a fall.

-Nonio for adjusting the corner opening of the handlebars. The combination with our upper steering plate makes registration extremely easy and fast without the use of special masks

-Double stainless steel screw for tightening the bracelet

-On the end of the stub there is an indispensable vernier if you need to shorten it to a size more suited to your needs

Main dimensional characteristics:
- 7 ° inclination angle
- 20mm feed offset
- Tube length 240mm
- Useful length of tube 240mm
- Pipe section: diam. East. 22mm - diam. int. 16.5mm
-For forks diam. 51 mm
Available anodized in black and natural.NOTES: for correct assembly, the steering limiter code LS.AP.7211 must also be purchased
N.B. This picture is only indicative
FOR MORE INFORMATION PLASE CONTACT US

【訂購前注意】
訂購前，還請詳加確認欲購買的顏色、尺寸等等資訊。
商品多為下訂後回覆交期，所以可能有商品停產，或需長時間等待商品出貨之狀況。
訂單若因為廠商缺貨與暫時無法交貨等因素，則不會成立；訂單若沒有成立則不會收取任何費用。
商品可能發生製造商單方面變更規格、外觀設計，導致包裝或本體造型與商品頁面圖片不同之情況，敬請見諒。
若因製造商單方面變更產品設計、規格，導致商品無法發揮訂購時預期之功能，還請您與本站客服諮詢後續處理。
商品自訂購至出貨經過多道運送流程，因此可能產生包裝在運送過程中變形、破損，但商品本身完好、可正常使用之情況。

【退貨注意】
若您需要商品退貨的服務，還請您至退貨區塊進行申請；並請您保持商品外觀、用原包裝外箱封裝完好。
在收到您的退貨申請時，我們會盡快派物流業者前去收貨。

【正品保證】
正品保證之商品，若有被查獲疑似為仿冒品，並經過相關訴訟，最後交由法院判決如實者，將會對購買此商品的顧客進行當初購買價格的10倍賠償。

※ 此商品為歐洲供應商直接採購、進口。因此若訂單成立，本站恕不接受取消該訂購。

※ 若您於商品訂購前，有任何問題；舉凡商品內容、規格、交期等，請透過商品諮詢進行確認。