PAGE TOP

【HURRICANE】Flat Type 2 Φ 7/8 吋 鋼製把手

會員價: NT$ 1,206

點數: 12
定價: NT$ 1,269
庫存OK

    • 商品編號:
    • HB0008C-01


03時12分現在:Webike在庫1個,約 4個工作天到貨!

適用車型:

APE50 08-12 (FI drum brake car) * Required switch hole drilling / * Change of clutch cable handling is required.
FTR223 (No side batches) * Required switch hole drilling / * Throttle cable ? Clutch cable ? Choke cable ? Change of handling of brake hose is required. / * It is necessary to change the direction of the brake banjo.
APE100 -12 (Drum brake car) *APE100 (09-) Only, required switch hole drilling / * Change of clutch cable handling is required.
TW225 E 00- (Disc brake car) * Required switch hole drilling / * Throttle cable ? Clutch cable ? Change of handling of brake hose is required.
SR500 88-00 (CV cab car) * Required switch hole drilling / * Throttle cable ? Clutch cable ? Decompression cable ? Change of brake cable needs to be changed. / * Please increase the bar end and install it in a feeling.
TW200 E 00- (Disc brake car) * Required switch hole drilling / * Throttle cable ? Clutch cable ? Change of handling of brake hose is required.
GRASS TRACKER -08 (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap. / * Throttle cable ? Clutch cable ? Change of handling of brake hose is required. / * It is necessary to change the direction of the brake banjo.
GRASS TRACKER BIGBOY -08 (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap. / * Throttle cable ? Clutch cable ? Change of handling of brake hose is required. / * It is necessary to change the direction of the brake banjo.
查看更多

同分類銷售排行

商品詳細敘述

以下翻譯由google提供,若您想查看原文請點選顯示原文

【要點】

車把顏色 : 鍍鉻

[把手規格]
車把 : 鋼,黑色 / 外徑Φ22 。 2mm / 內徑Φ18mm
可以使用STD電纜和軟管 。

[把手尺寸]
總寬度 : 665mm
支架安裝部件有效寬度 : 180mm
回退大小 : 130mm
內角 : 26度

【商品描述】


日本 。 原型,安裝確認,批量生產,由公司一貫管理 。 把手包括很多關注,如精選的材料東東大阪的技術多年,精心選擇材料通過知道,幾種類型的拋光,零件號沖壓,高精度彎曲和焊接,高品質表面處理 。 使用STKM 13 ASteel材料具有優異的拉伸強度 。 JMCA安全標准值清除 。 塗層厚且耐用·TripleNickel耐腐蝕性優良·鍍鉻 (鎳3層+鉻層) 完 。

【注意】


*手柄夾 (持有人或職位) 顯示在圖像中不包括在產品中 。
*所示尺寸是水平放置時的尺寸 。

適用車型

    • APE50 08-12 (FI drum brake car) * Required switch hole drilling / * Change of clutch cable handling is required.
    • FTR223 (No side batches) * Required switch hole drilling / * Throttle cable ? Clutch cable ? Choke cable ? Change of handling of brake hose is required. / * It is necessary to change the direction of the brake banjo.
    • APE100 -12 (Drum brake car) *APE100 (09-) Only, required switch hole drilling / * Change of clutch cable handling is required.
    • APE50 -07 / 8 (Carburetor car) *APE100 (09-) Only, required switch hole drilling / * Change of clutch cable handling is required.
    • GB250 CLUBMAN 95- (MC10-1500001-) * Required switch hole drilling / * Required side cap (For inner diameter φ 18 mm)
    • TW225 E 00- (Disc brake car) * Required switch hole drilling / * Throttle cable ? Clutch cable ? Change of handling of brake hose is required.
    • SR500 88-00 (CV cab car) * Required switch hole drilling / * Throttle cable ? Clutch cable ? Decompression cable ? Change of brake cable needs to be changed. / * Please increase the bar end and install it in a feeling.
    • TW200 E 00- (Disc brake car) * Required switch hole drilling / * Throttle cable ? Clutch cable ? Change of handling of brake hose is required.
    • SR400 88-00 (CV cab car) * Required switch hole drilling / * Throttle cable ? Clutch cable ? Decompression cable ? Change of brake cable needs to be changed. / * Please increase the bar end and install it in a feeling.
    • TW200 E -99 (Drum brake car) * Throttle cable ? Clutch cable ? Change of brake cable needs to be changed.
    • GRASS TRACKER -08 (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap. / * Throttle cable ? Clutch cable ? Change of handling of brake hose is required. / * It is necessary to change the direction of the brake banjo.
    • GRASS TRACKER BIGBOY -08 (Carburetor car) * Required switch hole drilling / * Normal can be used for side cap. / * Throttle cable ? Clutch cable ? Change of handling of brake hose is required. / * It is necessary to change the direction of the brake banjo.

商品評論

  • 0.0

    0 商品評論

  • 此商品沒有商品評論。
  • 撰寫評論

推薦商品

【DAYTONA】50B 把手
50B 把手 DAYTONA XV950 BOLT
2
【DOG HOUSE 惡搞手工廠】改裝低粗把 S-MAX版本
改裝低粗把 S-MAX版本 DOG HOUSE 惡搞手工廠 SMAX (Majesty S)
【DOG HOUSE 惡搞手工廠】改裝低粗把 MSX/GROM版本
改裝低粗把 MSX/GROM版本 DOG HOUSE 惡搞手工廠 MSX125(GROM)
【HURRICANE】SUPER BIKE Low Φ7/8英吋 金屬把手
SUPER BIKE Low Φ7/8英吋 金屬把手 HURRICANE MONKEY
【HURRICANE】FATCondor 専用把手
FATCondor 専用把手 HURRICANE MT-09
【HURRICANE】BOLT Shoulder Bag [ Bolt ] 専用把手
BOLT Shoulder Bag [ Bolt ] 専用把手 HURRICANE XV950 BOLT
【HURRICANE】Forward Condor 把手
Forward Condor 把手 HURRICANE MSX125(GROM)
【ZETA】GT把手 (高把 type-1)
GT把手 (高把 type-1) ZETA CB750
【HURRICANE】BM Conti3型 Φ7/8英吋 金屬把手
BM Conti3型 Φ7/8英吋 金屬把手 HURRICANE MONKEY
【HURRICANE】MT-09専用FAT Swallow把手
MT-09専用FAT Swallow把手 HURRICANE MT-09
【BIKERS】Rotating Bar Clamp 把手固定座上蓋 2個一組
Rotating Bar Clamp 把手固定座上蓋 2個一組 BIKERS FORZA (Reflex, NSS250)
【GP DREAM】【GP PRO 車把手28.6mm】
【GP PRO 車把手28.6mm】 GP DREAM MINI 125
【EFFEX】簡易安裝把手(OUTLET出清商品)
簡易安裝把手(OUTLET出清商品) EFFEX MSX125(GROM)
【DOG HOUSE 惡搞手工廠】改裝低粗把 BWS版本
改裝低粗把 BWS版本 DOG HOUSE 惡搞手工廠 BWS R
【EFFEX】Easy Fit 把手 EZ-FIT錐形把手
Easy Fit 把手 EZ-FIT錐形把手 EFFEX GSX-S1000
【DAYTONA】Dirt track 把手
Dirt track 把手 DAYTONA
【US YAMAHA】XSR900(TM) Clubman 把手
XSR900(TM) Clubman 把手 US YAMAHA XSR900
【EPIC】EPIC BWS 粗把把手
EPIC BWS 粗把把手 EPIC BWS125
【EFFEX】EZ-FIT 把手
EZ-FIT 把手 EFFEX CB1100
1
【SP武川】鋁合金把手
鋁合金把手 SP武川 MSX125(GROM)
【EFFEX】EZ-FIT Low 把手
EZ-FIT Low 把手 EFFEX CB1100
1
【HURRICANE】Conti Type 1 Φ 7/8 吋 鋼製把手
Conti Type 1 Φ 7/8 吋 鋼製把手 HURRICANE MONKEY
【ENDURANCE】多功能把手橫桿・Clamp Tightening Type
多功能把手橫桿・Clamp Tightening Type ENDURANCE FORZA (Reflex, NSS250)
【US YAMAHA】Tall 把手
Tall 把手 US YAMAHA XV950 BOLT
【US YAMAHA】下調式把手
下調式把手 US YAMAHA XV950 BOLT
【TYGA PERFORMANCE】把手組/銀色/Ninja 250/300R
把手組/銀色/Ninja 250/300R TYGA PERFORMANCE NINJA250R
【HURRICANE】Φ7/8英吋 Forward Conti type2  把手
Φ7/8英吋 Forward Conti type2 把手 HURRICANE MSX125(GROM)