快速出貨 在庫推薦
廠商在庫
LeoVince
LV-10 TITANIUM 排氣管尾段
廠商在庫
SC-PROJECT
CR-T 排氣管尾段(長版)
廠商在庫
AKRAPOVIC
JMCA規格 Slip-on 尾段排氣管
適用車型
[要點]
類型:滑套
袖子材質:鈦1級
袖子表面處理:噴砂處理
袖子塗裝:-
端蓋材質。鈦合金1級
端蓋加工:噴砂處理
支架材質:鈦合金1級
亮劍標識:激光蝕刻亮劍標識
亮劍標識:亮劍標識
焊接:Tig焊接
重量:1.13公斤(-0.74公斤與原廠相比)
同源認證:未通過
。
袖子材質:鈦1級
袖子表面處理:噴砂處理
袖子塗裝:-
端蓋材質。鈦合金1級
端蓋加工:噴砂處理
支架材質:鈦合金1級
亮劍標識:激光蝕刻亮劍標識
亮劍標識:亮劍標識
焊接:Tig焊接
重量:1.13公斤(-0.74公斤與原廠相比)
同源認證:未通過
。
[商品描述]
賽車DNA
與Leovince賽車部門合作開發，並應用在Moto 2和Moto 3中獲得的經驗。消音器和歧管采用鈦1級，是一種具有高延展性、強度和耐腐蝕性的純材料。tig焊接是完全由手工完成的，並強調了工匠精神。產品，同時保留其賽車DNA。
與Leovince賽車部門合作開發，並應用在Moto 2和Moto 3中獲得的經驗。消音器和歧管采用鈦1級，是一種具有高延展性、強度和耐腐蝕性的純材料。tig焊接是完全由手工完成的，並強調了工匠精神。產品，同時保留其賽車DNA。
[注意]
建議檢查該產品是否與車輛識別卡上標明的類型兼容。
[要點]
タイプ：SLIP-ON
Sleeve Material：Titanium Grade 1
Sleeve Finishing：Sandblast Finishing
Sleeve Painting：-
End Cap Material：Titanium Grade 1
End Cap Finishing：Sandblast Finishing
Bracket Material：Titanium Grade 1
LeoVince Logo：Laser Etched LeoVince Logo
Welding：TIG Weldings
WEIGHT：1.13 kg(-0.74 kg vs the OEM)
Homologation：Not approved
Sleeve Material：Titanium Grade 1
Sleeve Finishing：Sandblast Finishing
Sleeve Painting：-
End Cap Material：Titanium Grade 1
End Cap Finishing：Sandblast Finishing
Bracket Material：Titanium Grade 1
LeoVince Logo：Laser Etched LeoVince Logo
Welding：TIG Weldings
WEIGHT：1.13 kg(-0.74 kg vs the OEM)
Homologation：Not approved
[商品描述]
Racing DNA
Developed in collaboration with the LeoVince Racing Department and applying the experience gained in the Moto 2 and Moto 3 championships，the LV-10 Titanium expresses the best racing technology applied to an exhaust terminal intended for stock motorbikes.
The silencer and the the manifold are made using Titanium Grade 1，a pure material with high characteristics of ductility，strength and corrosion resistance while it guarantees a 30% weight reduction compared to stainless steel. TIG welding is done entirely by hand and underline the craftsmanship of the product while retaining its racing DNA.
Developed in collaboration with the LeoVince Racing Department and applying the experience gained in the Moto 2 and Moto 3 championships，the LV-10 Titanium expresses the best racing technology applied to an exhaust terminal intended for stock motorbikes.
The silencer and the the manifold are made using Titanium Grade 1，a pure material with high characteristics of ductility，strength and corrosion resistance while it guarantees a 30% weight reduction compared to stainless steel. TIG welding is done entirely by hand and underline the craftsmanship of the product while retaining its racing DNA.
[注意]
※ All pictures shown are for illustration purpose only.
※ Actual product may vary due to specific product application.
※ Before ordering the product，it is recommended to check that it is compatible with the type indicated on the Vehicle Identification Card.
※ Actual product may vary due to specific product application.
※ Before ordering the product，it is recommended to check that it is compatible with the type indicated on the Vehicle Identification Card.
問與答（0）
商品評論（0 ）
0/5