[要點]
美國製造:是
型號:IST
特定應用:是
樣式:性能改裝
型式:轉接線束
MADE IN THE U.S.A.:Yes
MODEL:IST
SPECIFIC APPLICATION:Yes
STYLE:Performance Replacement
TYPE:Harness Adapter
[商品描述]
・安全和系統利用曲軸位置傳感器,凸輪位置傳感器如果存在,地圖傳感器、氣缸頭溫度傳感器和獨家進氣流量傳感器檢測爆震或敲在發動機運行
・進氣流量傳感器允許ECU自動調整點火時間消除出現在何時敲
・優化電力和燃料經濟
・智能技術火花點火模塊需要一個安裝工具,必須單獨購買
・可選的高輸出線圈也可用 : 為安全和設計變量燃油噴射系統,單發的的線圈實際上是兩個不同的線圈在一個包中,線圈阻抗3歐姆/線圈 (分開售賣)
·美國制造
・The S&S system makes use of crank position sensor, cam position sensor if present, MAP sensor, cylinder head temperature sensor and an exclusive knock sensor that detects detonation or knock while the engine runs
・Knock sensor allows the ECU to automatically adjust ignition timing to eliminate knock whenever it occurs
・Optimizes power and fuel economy
・The Intelligent Spark Technology Ignition Module requires an installation kit that must be purchased separately
・Optional high-output coil also available: designed for the S&S Variable Fuel Injection System, the single-fire coil is actually two separate coils in a single package;coil impedance 3 ohm per coil (sold separately)
・Made in the U.S.A.
[注意]
*說明書是用英文書寫的。
*請注意,由於是進口產品,交貨期可能會延遲。
*不適用於燃料注入型。*除非使用凸輪位置傳感器,否則不推薦用於啟動應用. 使用曲軸位置傳感器的發動機很難啟動。*S&S點火模塊10-1-03後生產 (序號以“E”或更高字母開頭) 已經包含支持Guardian診斷系統的軟件. 這些模塊將適用於除2004-05年以外的所有應用程序. 10-1-05後生產的模塊 (序號以“G”或以上字母開頭) 除了其他指定的應用程序之外,還兼容04-05型號。
*不適用於燃料注入型。*除非使用凸輪位置傳感器,否則不推薦用於啟動應用. 使用曲軸位置傳感器的發動機很難啟動。*S&S點火模塊10-1-03後生產 (序號以“E”或更高字母開頭) 已經包含支持Guardian診斷系統的軟件. 這些模塊將適用於除2004-05年以外的所有應用程序. 10-1-05後生產的模塊 (序號以“G”或以上字母開頭) 除了其他指定的應用程序之外,還兼容04-05型號。
*不適用於燃料注入型。*除非使用凸輪位置傳感器,否則不推薦用於啟動應用. 使用曲軸位置傳感器的發動機很難啟動。*S&S點火模塊10-1-03後生產 (序號以“E”或更高字母開頭) 已經包含支持Guardian診斷系統的軟件. 這些模塊將適用於除2004-05年以外的所有應用程序. 10-1-05後生產的模塊 (序號以“G”或以上字母開頭) 除了其他指定的應用程序之外,還兼容04-05型號。
※ 取り扱い説明書は英語となります。
※ 輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※ Not for fuel-injected models.※ Not recommended for kick start applications unless a cam position sensor is used. Engines using crankshaft position sensors will be difficult to kick start.※ S&S IST ignition modules manufactured after 10-1-03 (serial number begins with "E" or higher letter) already contain software to support the Guardian Diagnostic System. These modules will work in all applications except 2004-05. Modules manufactured after 10-1-05 (serial number begins with "G" or higher letter) are compatible with 04-05 models in addition to the other specified applications.
※ Not for fuel-injected models.※ Not recommended for kick start applications unless a cam position sensor is used. Engines using crankshaft position sensors will be difficult to kick start.※ S&S IST ignition modules manufactured after 10-1-03 (serial number begins with "E" or higher letter) already contain software to support the Guardian Diagnostic System. These modules will work in all applications except 2004-05. Modules manufactured after 10-1-05 (serial number begins with "G" or higher letter) are compatible with 04-05 models in addition to the other specified applications.
※ Not for fuel-injected models.※ Not recommended for kick start applications unless a cam position sensor is used. Engines using crankshaft position sensors will be difficult to kick start.※ S&S IST ignition modules manufactured after 10-1-03 (serial number begins with "E" or higher letter) already contain software to support the Guardian Diagnostic System. These modules will work in all applications except 2004-05. Modules manufactured after 10-1-05 (serial number begins with "G" or higher letter) are compatible with 04-05 models in addition to the other specified applications.